The QP range is specific to every codec. These controls enable
VP8 drivers to define the supported range.
Change-Id: I7990aea15034776a33ae54699add244d694bf4ca
CRs-Fixed: 578892
Signed-off-by: Jorge Solano Altamirano <jsolano@codeaurora.org>
When the interactive governor selects to run at max frequency it doesn't
re-schedule the timer until it hits an idle. This change checks if the CPU
has been continuously busy for last 100ms on hitting an idle start. If yes,
then floor_validate_time is reset so that the CPU stays at max frequency
for at least another 100 ms before stepping down.
This is an important feature for detecting CPU intensive workloads which
require high frequencies for achieving better performance.
Change-Id: I7d48ffbc3d50a80af9be3bf94667ee3d0120b763
Signed-off-by: Rohit Gupta <rohgup@codeaurora.org>
As a part of usb disconnect, usb will be put into low power mode
by putting phy into retention, voting for xo shutdown and vdd
minimization, also turning off LDOs. But on 8x10 platform,turning
off regulators is causing leakage current due to hardware limitation.
Hence add support for vdd minimization without putting phy into
retention to prevent power consumption. Also disable id pull up
as recommended by hardware team.
CRs-Fixed: 585073
Change-Id: Ie484f93e561664681501337be407e4f8038ac74a
Signed-off-by: Saket Saurabh <ssaurabh@codeaurora.org>
Add the sensor handle and type define for the sensor class device
drivers. The define is used for the sensor class device driver
parameters "handle" and "type". By using the define, people could
easily get the "handle" and "type" name.
Change-Id: I3e985a831d428fe3e921b2aecd8018b92d139302
Signed-off-by: Jie Cheng <rockiec@codeaurora.org>
Add interface to support configuring equlaizer, bass boost,
virtualizer and reverb effects in DSP for tunnel mode of
playback.
Change-Id: I5ed578df1e1cb860734d2205c0895e82cfbdfbfc
Signed-off-by: Subhash Chandra Bose Naripeddy <snariped@codeaurora.org>
Signed-off-by: Ravi Kumar Alamanda <ralama@codeaurora.org>
Add interface to support configuring equlaizer, bass boost,
virtualizer and reverb effects in DSP for tunnel mode of
playback.
Change-Id: Ie1512e340315302691327b6379a0935170dc57a7
Signed-off-by: Subhash Chandra Bose Naripeddy <snariped@codeaurora.org>
Signed-off-by: Ravi Kumar Alamanda <ralama@codeaurora.org>
MISR allows a CRC to be generated from contents of a
particular hw block which can be used for validation.
Enable setup of misr and APIs to obtain CRC from hw blocks.
Change-Id: Ib07e31cba45d242922bd28b6b306220efece7b8d
Acked-by: Sachin Bhayare <sbhayare@qti.qualcomm.com>
Signed-off-by: Mayank Chopra <makchopra@codeaurora.org>
This change exposes s3d framepacking payload information
to userspace which client can use for display purpose.
Change-Id: I87daaad41e08ef19be96a86fd21e70a320b8c1e4
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Adds a new IOCTL that provides ability to set the JPEG clock rate
dynamically.
Change-Id: Ifd8e4d57f6688e5f09c9ef049bcf928483bf1f79
Signed-off-by: Kamen Kirov <kkirov@codeaurora.org>
Adding mechanism to Stop CAMIF immediately from user space
Change-Id: If015241598ff9134d1ce49def35f6083eff2d9c3
Signed-off-by: Abhishek Kondaveeti <akondave@codeaurora.org>
The usual scheme to initialize a cpuidle driver on a SMP is:
cpuidle_register_driver(drv);
for_each_possible_cpu(cpu) {
device = &per_cpu(cpuidle_dev, cpu);
cpuidle_register_device(device);
}
This code is duplicated in each cpuidle driver.
On UP systems, it is done this way:
cpuidle_register_driver(drv);
device = &per_cpu(cpuidle_dev, cpu);
cpuidle_register_device(device);
On UP, the macro 'for_each_cpu' does one iteration:
for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask)
Hence, the initialization loop is the same for UP than SMP.
Beside, we saw different bugs / mis-initialization / return code unchecked in
the different drivers, the code is duplicated including bugs. After fixing all
these ones, it appears the initialization pattern is the same for everyone.
Please note, some drivers are doing dev->state_count = drv->state_count. This is
not necessary because it is done by the cpuidle_enable_device function in the
cpuidle framework. This is true, until you have the same states for all your
devices. Otherwise, the 'low level' API should be used instead with the specific
initialization for the driver.
Let's add a wrapper function doing this initialization with a cpumask parameter
for the coupled idle states and use it for all the drivers.
That will save a lot of LOC, consolidate the code, and the modifications in the
future could be done in a single place. Another benefit is the consolidation of
the cpuidle_device variable which is now in the cpuidle framework and no longer
spread accross the different arch specific drivers.
Change-Id: I8f75188d5770871620f758c2973b74384ac570d5
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Karthik Parsha <kparsha@codeaurora.org>
Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org>
Add new API to enable or disable the kernel client's trip
threshold request. The enable or disable trip threshold requests
from different kernel clients and userspace client will
activate/deactivate the corresponding clients threshold request.
Modify thermal sys framework to include only the active
thresholds from clients to determine the current trip
thresholds for tsens.
CRs-Fixed: 561775
Change-Id: I5de81b2272de92f19aa79a13d7bdbd58d4012cf3
Signed-off-by: Ram Chandrasekar <rkumbako@codeaurora.org>
Use the vbif performance counter which counts bus busy cycles
to determine the requested bus bandwidth vote at a given
GPU frequency.
Change-Id: I18915ef8a2be75a7ef5795a6030a1f2ddd09a967
CRs-fixed: 551893
Signed-off-by: Lucille Sylvester <lsylvest@codeaurora.org>
Use a bus specific speed flag rather than overloading
the least upper bound flag.
Change-Id: I343726e6e0d9885f39c343ed56c1667ab2008aee
Signed-off-by: Lucille Sylvester <lsylvest@codeaurora.org>
The devfreq framework calls a frequency targeting function with
a flag parameter. Allow the governors to influence that parameter.
Change-Id: I4058bd9dcd027dd246ccdb90d25c68f1dc055901
Signed-off-by: Lucille Sylvester <lsylvest@codeaurora.org>
Convert the clock frequency scaling infrastructure to
be based on devfreq.
Change-Id: I1a60ba339db5715a8836b835bd1b29b46e151af6
Signed-off-by: Jeremy Gebben <jgebben@codeaurora.org>
Signed-off-by: Vladimir Razgulin <vrazguli@codeaurora.org>
This is to help the hardware configured in world
roaming mode to save power when not connected to
any AP.
CRs-Fixed: 542802
Change-Id: Ia643d0e9848dcd486832973bd6dd186edd7bd4ea
Signed-off-by: Mihir Shete <smihir@codeaurora.org>
Added six zone memory color adjustment for picture adjustment block
in post-processing. This includes the necessary structures, flags,
and register reads and writes in order to program the six zone LUT hardware
block in PA
Change-Id: Idb381077497e2b63399ebeb7051027a46b5dd6e1
Signed-off-by: Benet Clark <benetc@codeaurora.org>
Signed-off-by: Carl Vanderlip <carlv@codeaurora.org>
The new version of PA in postproc has added functionality in DSPP and VIG.
This change adds functions for handling the reading and writing of these
new registers, as well as PA v2 setup in DSPP and VIG setups. This change
only adds functionality for global adjustment and memory color adjustment.
Change-Id: Iab1644714928055f15cf496185509b1712d0ceae
Signed-off-by: Benet Clark <benetc@codeaurora.org>
Signed-off-by: Carl Vanderlip <carlv@codeaurora.org>
Add support to enable solid fill on pipe with an option to
configure fill-color by userspace. This support does not confine
to background pipe and can be used to enable solid fill on any source
surface processing pipes irrespective of the z-order.
This support can be used in requirements involving constant
color layers.
Change-Id: Iae3c2968ca2f2f1be161e9c2f857641ffbb859e5
Signed-off-by: Adrian Salido-Moreno <adrianm@codeaurora.org>
Signed-off-by: Mayank Chopra <makchopra@codeaurora.org>
mdss driver parameters, visible to userland, are documented,
giving out short descriptions of their role.
Change-Id: I34bfe0152c7f7629c18a968a474ab0a3369560fa
Signed-off-by: Adrian Salido-Moreno <adrianm@codeaurora.org>
Signed-off-by: Mayank Chopra <makchopra@codeaurora.org>
