Add support into the stub-regulator driver so that stub-regulator
devices may be specified via device tree.
Change-Id: Ib72ef7c8caacb50955cd7c182e790300daf152ce
Signed-off-by: David Collins <collinsd@codeaurora.org>
This driver supports OnSemi NCP6335D synchronous buck converter.
The NCP6335D is a step-down switching voltage regulator which
provides a voltage range from 0.6 to 1.4V. The regulator is
controlled via the I2C interface.
Change-Id: I237fe781d5c54d2b3ffc65096b9e83c387d3b6f5
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Create a function to be called very early (before the krait-regulator
driver probes) to switch a cpu in BHS mode. Since we have not yet
probed yet, use the base address passed in to do the necessary writes.
Change-Id: I1cb1659f1e31e52b9d209427887230ee922aef80
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Badger kraits have a single voltage supply coming from the pmic. This
supply is provided by multiple switching regulators operating in
ganged mode.
There is a LDO and a HS (Head Switch) per core that further control the
voltage supply to that core.
This driver manages the ganged supply by calling upon the spm driver to
set phases and voltage.
Change-Id: Idc0a0ae3242729a7e0ede5962974c09b61d8d39c
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
* commit 'AU_LINUX_ANDROID_ICS.04.00.04.00.130': (39 commits)
msm: vidc: Add support for DIVX 4/5/6
msm_fb: display: Set the minimal sleep time for DSI PHY Initialisation
board: 8930: add debounce interval for gpio-keys
regulator: Extend of_get_regulator_init_data to support non-DT consumers
regulator: pm8xxx-regulator: Add slew_rate platform data parameter
crypto: Fix initialization of array variable.
arm: free all .init memory when CONFIG_STRICT_MEMORY_RWX is set
msm: clock-copper: Remove block reset ability from most clocks
msm: clock-local2: Fix local_vote_clk_reset to use right to_*_clk macro
EHCI: HSIC: Add support for suspend, resume and URB logging
arm/dt: msm-pm8941: Change boost regulator register address to 0xA000
msm: camera: Move server code into seperate file.
msm: camera: Close camera gracefully in case of userspace crash
media: dvb: mpq: Support getting decoder's buffer status
Bluetooth: Wait for wcnss to be ready after SSR
msm: msm_sdcc: Add device tree support for SDCC controllers
msm: display: Change DSI escape clock to byte clock
msm: clock-8960: Change source of DSI escape clock to byte clock
ASOC: msm: Enable mpq8064 machine driver.
EHCI: HSIC: Set the interrupt threshold control value to 8ms
...
Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
AU_LINUX_ANDROID_ICS.04.00.04.00.126 from msm-3.0.
First parent is from google/android-3.4.
* commit 'AU_LINUX_ANDROID_ICS.04.00.04.00.126': (8712 commits)
PRNG: Device tree entry for qrng device.
vidc:1080p: Set video core timeout value for Thumbnail mode
msm: sps: improve the debugging support in SPS driver
board-8064 msm: Overlap secure and non secure video firmware heaps.
msm: clock: Add handoff ops for 7x30 and copper XO clocks
msm_fb: display: Wait for external vsync before DTV IOMMU unmap
msm: Fix ciruclar dependency in debug UART settings
msm: gdsc: Add GDSC regulator driver for msm-copper
defconfig: Enable Mobicore Driver.
mobicore: Add mobicore driver.
mobicore: rename variable to lower case.
mobicore: rename folder.
mobicore: add makefiles
mobicore: initial import of kernel driver
ASoC: msm: Add SLIMBUS_2_RX CPU DAI
board-8064-gpio: Update FUNC for EPM SPI CS
msm_fb: display: Remove chicken bit config during video playback
mmc: msm_sdcc: enable the sanitize capability
msm-fb: display: lm2 writeback support on mpq platfroms
msm_fb: display: Disable LVDS phy & pll during panel off
...
Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
Add a slew_rate platform data parameter which can be used to
specify the worst case board dependent voltage slew rate of a
given regulator.
regulator_set_voltage calls will be delayed based on the
slew_rate parameter when voltage is stepping up. The delay is
calculated as (new_uV - old_uV) / slew_rate.
If no slew_rate is specified for a given regulator (i.e.
slew_rate == 0), then slew_rate will default to
max_uV / enable_time.
Change-Id: I7a9be300945d90941040b3a26d8a4199338bf9c4
Signed-off-by: David Collins <collinsd@codeaurora.org>
Add the qpnp-regulator driver to support regulators found in
Qualcomm plug-and-play (QPNP) PMIC chips. QPNP chips make use of
Qualcomm's SPMI register convention. The particular hardware
characteristics of a given regulator can be derived from the
values present in the type and subtype registers.
The qpnp-regulator driver supports probing with either device tree
device specification or with board file specified platform data.
Change-Id: I4f74431a50949763d651faf992b5d2567d05758e
Signed-off-by: David Collins <collinsd@codeaurora.org>
Pull regulator fixes from Mark Brown:
"A bunch of smallish fixes that came up during the merge window as
things got more testing - even more fixes from Axel, a fix for error
handling in more complex systems using -EPROBE_DEFER and a couple of
small fixes for the new dummy regulators."
* tag 'regulator-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Remove non-existent parameter from fixed-helper.c kernel doc
regulator: Fix setting new voltage in s5m8767_set_voltage
regulator: fix sysfs name collision between dummy and fixed dummy regulator
regulator: Fix deadlock on removal of regulators with supplies
regulator: Fix comments in include/linux/regulator/machine.h
regulator: Only update [LDOx|DCx]_HIB_MODE bits in wm8350_[ldo|dcdc]_set_suspend_disable
regulator: Fix setting low power mode for wm831x aldo
regulator: Return microamps in wm8350_isink_get_current
regulator: wm8350: Fix the logic to choose best current limit setting
regulator: wm831x-isink: Fix the logic to choose best current limit setting
regulator: wm831x-dcdc: Fix the logic to choose best current limit setting
regulator: anatop: patching to device-tree property "reg".
regulator: Do proper shift to set correct bit for DC[2|5]_HIB_MODE setting
regulator: Fix restoring pmic.dcdcx_hib_mode settings in wm8350_dcdc_set_suspend_enable
regulator: Fix unbalanced lock/unlock in mc13892_regulator_probe error path
regulator: Fix set and get current limit for wm831x_buckv
regulator: tps6586x: Fix list minimal voltage setting for LDO0
Some usecases of stub-regulator require the regulator devices to
be probed early on. As a consequence, allow for stub-regulator
to be added at a custom time by the platform code. Simply
changing the init level of this driver is not enough. We must
allow for other drivers added at the same init level to be
dependencies or dependents of this driver.
Change-Id: Ifd57d0e77e25f73dfb16c45c6774a382873ec44a
Signed-off-by: Michael Bohan <mbohan@codeaurora.org>
Pull MFD changes from Samuel Ortiz:
- 4 new drivers: Freescale i.MX on-chip Anatop, Ricoh's RC5T583 and
TI's TPS65090 and TPS65217.
- New variants support (8420, 8520 ab9540), cleanups and bug fixes for
the abx500 and db8500 ST-E chipsets.
- Some minor fixes and update for the wm8994 from Mark.
- The beginning of a long term TWL cleanup effort coming from the TI
folks.
- Various fixes and cleanups for the s5m, TPS659xx, pm860x, and MAX8997
drivers.
Fix up trivial conflicts due to duplicate patches and header file
cleanups (<linux/device.h> removal etc).
* tag 'mfd_3.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (97 commits)
gpio/twl: Add DT support to gpio-twl4030 driver
gpio/twl: Allocate irq_desc dynamically for SPARSE_IRQ support
mfd: Detach twl6040 from the pmic mfd driver
mfd: Replace twl-* pr_ macros by the dev_ equivalent and do various cleanups
mfd: Micro-optimization on twl4030 IRQ handler
mfd: Make twl4030 SIH SPARSE_IRQ capable
mfd: Move twl-core IRQ allocation into twl[4030|6030]-irq files
mfd: Remove references already defineid in header file from twl-core
mfd: Remove unneeded header from twl-core
mfd: Make twl-core not depend on pdata->irq_base/end
ARM: OMAP2+: board-omap4-*: Do not use anymore TWL6030_IRQ_BASE in board files
mfd: Return twl6030_mmc_card_detect IRQ for board setup
Revert "mfd: Add platform data for MAX8997 haptic driver"
mfd: Add support for TPS65090
mfd: Add some da9052-i2c section annotations
mfd: Build rtc5t583 only if I2C config is selected to y.
mfd: Add anatop mfd driver
mfd: Fix compilation error in tps65910.h
mfd: Add 8420 variant to db8500-prcmu
mfd: Add 8520 PRCMU variant to db8500-prcmu
...
Device nodes in DT can associate themselves with one or more
regulators/supply by providing a list of phandles (to regulator nodes)
and corresponding supply names.
For Example:
devicenode: node@0x0 {
...
...
vmmc-supply = <®ulator1>;
vpll-supply = <®ulator2>;
};
The driver would then do a regulator_get(dev, "vmmc"); to get
regulator1 and do a regulator_get(dev, "vpll"); to get
regulator2.
of_get_regulator() extracts the regulator node for a given
device, based on the supply name.
Use it to look up the regulator for a given consumer from device tree, during
a regulator_get(). If not found fallback and lookup through
the regulator_map_list instead.
Also, since the regulator dt nodes can use the same binding to
associate with a parent regulator/supply, allow the drivers to
specify a supply_name, which can then be used to lookup dt
to find the parent phandle.
Change-Id: I124a4ba1a64c1145bdd016d91b9814c29eefeb36
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[mbohan: resolve conflict in drivers/regulator/core.c]
Signed-off-by: Michael Bohan <mbohan@codeaurora.org>
With device tree support for regulators, its needed that the
regulator_dev->dev device has the right of_node attached.
To be able to do this add an additional parameter to the
regulator_register() api, wherein the dt-adapted driver can
then pass this additional info onto the regulator core.
Change-Id: Idf7c4e532cc06fd00b8182b635d15dcfafb2cef9
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[mbohan: Update regulator_register for msm regulator drivers]
Signed-off-by: Michael Bohan <mbohan@codeaurora.org>
The helper routine is meant to be used by the regulator drivers
to extract the regulator_init_data structure from the data
that is passed from device tree.
'consumer_supplies' which is part of regulator_init_data is not extracted
as the regulator consumer mappings are passed through DT differently,
implemented in subsequent patches.
Similarly the regulator<-->parent/supply mapping is handled in
subsequent patches.
Also add documentation for regulator bindings to be used to pass
regulator_init_data struct information from device tree.
Some of the regulator properties which are linux and board specific,
are left out since its not clear if they can
be in someway embedded into the kernel or passed in from DT.
They will be revisited later.
Change-Id: I4f270a41687199032499cd923854a871c4d58ca2
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Michael Bohan <mbohan@codeaurora.org>
There's no need for the API to modify it and having it const makes it
easier to use with random strings the board code has.
Change-Id: Icd7e600291f281e80f60ef857c22f22cba08bfc1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[mbohan: port MSM regulator drivers to new const type]
Signed-off-by: Michael Bohan <mbohan@codeaurora.org>
Pull "ARM: driver specific updates" from Arnd Bergmann:
"These are all specific to some driver. They are typically the
platform side of a change in the drivers directory, such as adding a
new driver or extending the interface to the platform. In cases where
there is no maintainer for the driver, or the maintainer prefers to
have the platform changes in the same branch as the driver changes,
the patches to the drivers are included as well.
A much smaller set of driver updates that depend on other branches
getting merged first will be sent later.
The new export of tegra_chip_uid conflicts with other changes in
fuse.c. In rtc-sa1100.c, the global removal of IRQF_DISABLED
conflicts with the cleanup of the interrupt handling of that driver.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>"
Fixed up aforementioned trivial conflicts.
* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (94 commits)
ARM: SAMSUNG: change the name from s3c-sdhci to exynos4-sdhci
mmc: sdhci-s3c: add platform data for the second capability
ARM: SAMSUNG: support the second capability for samsung-soc
ARM: EXYNOS: add support DMA for EXYNOS4X12 SoC
ARM: EXYNOS: Add apb_pclk clkdev entry for mdma1
ARM: EXYNOS: Enable MDMA driver
regulator: Remove bq24022 regulator driver
rtc: sa1100: add OF support
pxa: magician/hx4700: Convert to gpio-regulator from bq24022
ARM: OMAP3+: SmartReflex: fix error handling
ARM: OMAP3+: SmartReflex: fix the use of debugfs_create_* API
ARM: OMAP3+: SmartReflex: micro-optimization for sanity check
ARM: OMAP3+: SmartReflex: misc cleanups
ARM: OMAP3+: SmartReflex: move late_initcall() closer to its argument
ARM: OMAP3+: SmartReflex: add missing platform_set_drvdata()
ARM: OMAP3+: hwmod: add SmartReflex IRQs
ARM: OMAP3+: SmartReflex: clear ERRCONFIG_VPBOUNDINTST only on a need
ARM: OMAP3+: SmartReflex: Fix status masking in ERRCONFIG register
ARM: OMAP3+: SmartReflex: Add a shutdown hook
ARM: OMAP3+: SmartReflex Class3: disable errorgen before disable VP
...
Conflicts:
arch/arm/mach-tegra/Makefile
arch/arm/mach-tegra/fuse.c
drivers/rtc/rtc-sa1100.c
Pull <linux/device.h> avoidance patches from Paul Gortmaker:
"Nearly every subsystem has some kind of header with a proto like:
void foo(struct device *dev);
and yet there is no reason for most of these guys to care about the
sub fields within the device struct. This allows us to significantly
reduce the scope of headers including headers. For this instance, a
reduction of about 40% is achieved by replacing the include with the
simple fact that the device is some kind of a struct.
Unlike the much larger module.h cleanup, this one is simply two
commits. One to fix the implicit <linux/device.h> users, and then one
to delete the device.h includes from the linux/include/ dir wherever
possible."
* tag 'device-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
device.h: audit and cleanup users in main include dir
device.h: cleanup users outside of linux/include (C files)
The pxa regulator branch removes the bq24022 driver, while a lot of
other regulator drivers got added in the regulator tree. This
resolves the trivial conflicts by merging in the regulator patches
that are already merged into v3.4.
Conflicts:
drivers/regulator/Kconfig
drivers/regulator/Makefile
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The <linux/device.h> header includes a lot of stuff, and
it in turn gets a lot of use just for the basic "struct device"
which appears so often.
Clean up the users as follows:
1) For those headers only needing "struct device" as a pointer
in fcn args, replace the include with exactly that.
2) For headers not really using anything from device.h, simply
delete the include altogether.
3) For headers relying on getting device.h implicitly before
being included themselves, now explicitly include device.h
4) For files in which doing #1 or #2 uncovers an implicit
dependency on some other header, fix by explicitly adding
the required header(s).
Any C files that were implicitly relying on device.h to be
present have already been dealt with in advance.
Total removals from #1 and #2: 51. Total additions coming
from #3: 9. Total other implicit dependencies from #4: 7.
As of 3.3-rc1, there were 110, so a net removal of 42 gives
about a 38% reduction in device.h presence in include/*
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Add support for a dummy driver that has an implementation
connected to no real hardware devices. Its purpose is to aid
bringup scenarios by providing clients a regulator interface
that they expect. This driver shouldn't be enabled if a real
device implementation for a particular platform already exists.
Change-Id: Ib83027b4e599ebbc3cb153b2f346bb03495bb746
Signed-off-by: Michael Bohan <mbohan@codeaurora.org>
The bq24022 driver is just a specialised form of a gpio-regulator.
As all former users of it now use the gpio-regulator directly, there
is no need to keep it around.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Some devices require a regulator to work, but boards may not have
a software controllable regulator for this device. Provide a helper
function to make it simpler for these boards to register a fixed
regulator as a dummy regulator.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
If CONFIG_DEBUG_FS=y debugfs functions will never return an
ERR_PTR. Instead they'll return NULL. The intent is to remove
ifdefs in calling code.
Update the code to reflect this. We gain an extra dentry pointer
per struct regulator and struct regulator_dev but that should be
ok because most distros have debugfs compiled in anyway.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Add the ability to selectively enable over current protection
(OCP) for LVS and MVS type PMIC voltage switches. OCP is used to
automatically disable the output of a PMIC switch in hardware when
the load on the switch becomes too large.
The sequence used when enabling a switch when OCP is desired is as
follows:
1. Disable OCP.
2. Enable the switch.
3. Wait for ocp_enable_time microseconds.
4. Enable OCP.
This sequence is used to ensure that sufficient time is allowed
for inrush current to subside so that a false OCP event is not
triggered. The delay time is board specific.
Change-Id: I0ea73d3bddd3280ff25f232ece0f1175a52d36cc
Signed-off-by: David Collins <collinsd@codeaurora.org>
Commit d5ad34f7cb "regulator: Implement devm_regulator_free()"
actually implements devm_regulator_put.
Thus rename devm_regulator_free to devm_regulator_put.
Also add empty devm_regulator_put for !CONFIG_REGULATOR
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This fixes below build error if CONFIG_REGULATOR is disabled.
CC sound/soc/codecs/wm5100.o
sound/soc/codecs/wm5100.c: In function ‘wm5100_i2c_probe’:
sound/soc/codecs/wm5100.c:2462: error: implicit declaration of function ‘devm_regulator_bulk_get’
make[3]: *** [sound/soc/codecs/wm5100.o] Error 1
make[2]: *** [sound/soc/codecs] Error 2
make[1]: *** [sound/soc] Error 2
make: *** [sound] Error 2
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Allow consumers to free regulators allocated using devm_regulator_get()
if they need to. This will not normally be required.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Add a resource managed regulator_get() to simplify regulator
usage in drivers. This allows driver authors to "get and forget"
about their regulators by automatically calling regulator_put()
when the driver is detached.
[Fixed up a couple of coding style issues -- broonie]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
The regulator module consists of 1 DCDC. The output voltage
is configurable and is meant for supply power to the core
voltage of Soc.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Add a resource managed regulator_get() to simplify regulator
usage in drivers. This allows driver authors to "get and forget"
about their regulators by automatically calling regulator_put()
when the driver is detached.
[Fixed up a couple of coding style issues -- broonie]
Change-Id: Ie32415c3a9f2c4aa99a98b6cb92a784e23d874ea
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Delete the pm8018-regulator driver now that it has been replaced
by the pm8xxx-regulator driver.
Change-Id: I18b4944dcea6ef6900f740b61621548bd1ac9d49
Signed-off-by: David Collins <collinsd@codeaurora.org>
Delete the pm8921-regulator driver now that it has been replaced
by the pm8xxx-regulator driver.
Change-Id: I36ab68ae7b37988356397d4ac5039aa78a1a2955
Signed-off-by: David Collins <collinsd@codeaurora.org>
Create a PM8XXX regulator driver that can support PMIC PM8921
variants including: PM8018, PM8038, and PM8921.
Change-Id: I60d1302e4af9a4c5caa72301c904867acd2ebe0f
Signed-off-by: David Collins <collinsd@codeaurora.org>
Move the following subdevices to use the pm8xxx interface -
mpp, irq, thermal, regulators.
This allows usage of a common driver for modules which are same
across multiple PM8XXX PMICs. It also provides flexibility
to add/remove subdevices for multiple board configurations.
Change-Id: I6478ec1b99b1ab55ca370d314dbeb590103a4b1c
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
It's not always true that the device_node of regulator can be found
at dev->of_node at the time when of_get_regulator_init_data() is being
called, because in some cases the regulator nodes in device tree do
not have 'struct device' behind them until regulator_dev gets created
for it by core function regulator_register().
The patch adds device_node as a new parameter to
of_get_regulator_init_data(), so that caller can pass in the node of
regulator directly.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Device nodes in DT can associate themselves with one or more
regulators/supply by providing a list of phandles (to regulator nodes)
and corresponding supply names.
For Example:
devicenode: node@0x0 {
...
...
vmmc-supply = <®ulator1>;
vpll-supply = <®ulator2>;
};
The driver would then do a regulator_get(dev, "vmmc"); to get
regulator1 and do a regulator_get(dev, "vpll"); to get
regulator2.
of_get_regulator() extracts the regulator node for a given
device, based on the supply name.
Use it to look up the regulator for a given consumer from device tree, during
a regulator_get(). If not found fallback and lookup through
the regulator_map_list instead.
Also, since the regulator dt nodes can use the same binding to
associate with a parent regulator/supply, allow the drivers to
specify a supply_name, which can then be used to lookup dt
to find the parent phandle.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
With device tree support for regulators, its needed that the
regulator_dev->dev device has the right of_node attached.
To be able to do this add an additional parameter to the
regulator_register() api, wherein the dt-adapted driver can
then pass this additional info onto the regulator core.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
The helper routine is meant to be used by the regulator drivers
to extract the regulator_init_data structure from the data
that is passed from device tree.
'consumer_supplies' which is part of regulator_init_data is not extracted
as the regulator consumer mappings are passed through DT differently,
implemented in subsequent patches.
Similarly the regulator<-->parent/supply mapping is handled in
subsequent patches.
Also add documentation for regulator bindings to be used to pass
regulator_init_data struct information from device tree.
Some of the regulator properties which are linux and board specific,
are left out since its not clear if they can
be in someway embedded into the kernel or passed in from DT.
They will be revisited later.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Move the following subdevices to use the pm8xxx interface -
mpp, irq, gpio, keypad, power-key, leds, othc, vibrator,
rtc, batt-alarm, thermal, upl, nfc, pwm, xoadc, regulators,
xo-buffers, charger.
This allows usage of a common driver for modules which are same
across multiple PM8XXX PMICs. It also provides flexibility
to add/remove subdevices for multiple board configurations.
Change-Id: Id9795552fc9f4a2c920c070babfaef1f4cd6ca61
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
David Collins
Anirudh Ghayal
Abhijeet Dharmapurikar
Steve Muckle
Linus Torvalds
Michael Bohan
Axel Lin
Rajendra Nayak
Mark Brown
Arnd Bergmann
Paul Gortmaker
Heiko Stübner
Linus Walleij
Sascha Hauer
Stephen Boyd
Kim, Milo
Laxman Dewangan
Donggeun Kim
MyungJoo Ham
Shawn Guo