Files
android_kernel_samsung_msm8…/include/linux/usb/functionfs.h
T
Arve Hjønnevåg aa71c6a1de usb: gadget: FunctionFS and SuperSpeed updates
usb: gadget: f_fs: HACK: Round reads up to 512 bytes to work with dwc3

Signed-off-by: Arve Hjønnevåg <arve@android.com>

USB: f_fs: Fix epfile crash during composition switch

epfile's ep pointer may be NULL during adb transfer
and composition switch happening in parallel. As part
of composition switch, first it is set to NONE. Setting
sys.usb.config to NONE stops adb and disables the composition.
stop adb is not blocking call and adb still might be doing
epfile read/write for some time when function unbind is
ongoing making the data structures NULL.

To fix this crash, call usb_ep_dequeue only if ep->ep is
valid. Similarly in success case, return ep->status only
if ep->ep is valid otherwise return -ENODEV.

CRs-Fixed: 643663
Change-Id: Ic152fc1db31cad6f97b8d16d91350dad857a4bf9
Signed-off-by: Sujeet Kumar <ksujeet@codeaurora.org>

USB: gadget: f_fs: Release endpoint upon disable

Endpoints are claimed using usb_ep_autoconfig function,
It will choose an unclaimed usb_ep and prevent the endpoint
from being returned by a later autoconfig calls. We can mark
the driver_data pointer once ep_enable is done in bind.

If we cannot mark to null upon function disable the corresponding
endpoint is not allocated by a later autoconfig call. The current
code does not make the ep->driver_data to null upon function disable.
This is leading to unclaimed endpoints for later autoconfig calls.
Claim the endpoints by assigning ep->driver_data to NULL.

CRs-Fixed: 633673
Change-Id: I221b98ef36cc2a60d27507a2442061a30ed410f4
Signed-off-by: ChandanaKishori Chiluveru <cchilu@codeaurora.org>

USB: gagget: f_fs: Return error if TX req is queued during device offline

when USB cable is disconnected during TX data transfers, endpoints will
be disabled during function disable. If userspace client tries to queue
requests on disabled endpoints, driver will wait till endpoints are
enabled and then queues previous session requests. This results in kernel
driver and userspace driver out of sync and due to this, stall will be
seen. Hence fix this issue by returning error value if client tries to
queue requests on TX endpoint during device offline.

CRs-Fixed: 633497
Change-Id: I3e43b8a704367aff7fe8dd88159315aef811c51c
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>

USB: f_fs: Fail stale read IOs after disconnect

After a USB disconnect, endpoints for adb are disabled.
After this no IO is allowed on the endpoints.
Since, adbd is not aware of this disconnect, it may
still perform read/writes IO. For adb writes, IOs are
failed, but for adb reads kernel waits untill endpoints
are enabled.

When a USB disconnect and adb read still queued
a buffer to kernel, ffs_epfile_io simply waits for
endpoint to be enabled. A next connect happens
and endpoints are enabled after set_alt, the adb
read stale buffer from previous session continues
and queues to endpoint.

All this time, adb did not close the epfile because
it did not get return status on the IOs which it
queued. This is an issue, because a new session
is not established and both userspace and kernel
goes out of sync.

To fix this issue, when endpoints are disbled
set epfile error. This epfile error is only cleared
in epfile open. This will ensure that after a USB
disconnect and connect, new session is established.

Also, return ENODEV if endpoints not enabled rather
than EINTR as EINTR case, and simply retries the
request. Incase usb_ep_queue failed, return -EIO
inspite of depend on return status from usb_ep_queue.

CRs-Fixed: 633497
Change-Id: I6e677e98ec28e5462b372ed290acdde251286f48
Signed-off-by: Sujeet Kumar <ksujeet@codeaurora.org>

USB: f_fs: Cutoff epfile IO before epfile could get freed

epfile may get freed and accessing epfile's error flag to
cut off IOs may lead to use after free.

Move the epfile error flag setting above in the order
so that it guaranteed to be valid.

CRs-Fixed: 668046
Change-Id: I0017513393ddb4fd288cd4e1c2adf9d5ee3bc660
Signed-off-by: Sujeet Kumar <ksujeet@codeaurora.org>

USB: f_fs: Check error status before doing epfile I/O

Set error status before disabling endpoint during function
disable and also check error status before handling I/O. If error
status is set, return error status to read/write calls made by
userspace. Also set file's private data to NULL during epfile
release.

CRs-Fixed: 671880
Change-Id: I14b5ee541dfc18a7802ef4a8033878a7729d9adb
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>

USB: f_fs: Fix disconnect check during ongoing IO

F_FS function driver allocated ffs_eps and updates ffs_ep->ep
to corresponding usb_ep during func->bind and never clears it.
On bind it also saves ffs_ep context in epfile->ep.
During func->disable, it clears only ffs_ep context in epfile->ep
and on func->unbind it frees ffs_eps memory.
ffs_epfile_io routine currently relies on ffs_ep->ep (which is
never cleared and ffs_ep could be freed on unbind) to detect any
disconnect during active IO. This can result in various issues e.g.
use after free use of ffs_ep if unbind finished before epfile_io
could resume or "stop adbd" trying to dequeue a freed USB request
when epfile_io could execute only after F_FS got disabled as
'if (ep->ep)' check would be TRUE.
Fix this by checking stored ffs_ep context against latest epfile->ep
to figure out if endpoint got disabled or changed before acquiring
spin_lock.

Change-Id: I6bdcdf0dff0813ed7b2af8c24f544a22796b0369
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>

USB: f_fs: Move ep completion out of stack

Allocating completion on the stack may lead to
invalid access when udc irq tries to complete
the request but interrupted completion returns
immediately. This happens because request is not
held to be dequeued anymore making the completion
invalid.

Move the completions in ffs data like it is for ep0.

CRs-Fixed: 653761
Change-Id: I15102538d1b5bee14dfa3c7b3fa1f8e3f767cf71
Signed-off-by: Sujeet Kumar <ksujeet@codeaurora.org>

usb: dwc3: gadget: Release gadget lock when handling suspend/resume

gadget_driver suspend/resume operations might require some
dwc3-gadget operations, such as enabling and disabling
endpoints. If the lock is not released, this can cause a
deadlock scenario.

Change-Id: I1e12de65e40492b115ab35de78c2352730649db5
Signed-off-by: Bar Weiner <bweiner@codeaurora.org>

usb: dwc3: gadget: Iterate only over valid endpoints

Make dwc3_gadget_resize_tx_fifos() iterate only over IN
endpoints that are actually present, based on the
num_in_eps parameter. This terminates the loop so as to
prevent dereferencing a potential NULL dwc->eps[i] where
i >= (num_in_eps + num_out_eps).

Change-Id: I07f711bfd380dce212e86b59cf417f84ca7eb006
Signed-off-by: Jack Pham <jackp@codeaurora.org>

usb: dwc3: gadget: Protect against ep disabling during completion

In dwc3_cleanup_done_reqs(), a potential race condition
could arise when dwc3_gadget_giveback() temporarily
releases the main spinlock.  If during this window the
very endpoint being handled becomes disabled, it would
lead to a NULL pointer dereference in the code that
follows.  Guard against this by making sure the endpoint
is still enabled after returning from the giveback call.

CRs-fixed: 628972
Change-Id: Ifdb823fff12747f699217d871a5959c85b5340f7
Signed-off-by: Jack Pham <jackp@codeaurora.org>

usb: dwc3: calculate the number of endpoints

hwparams2 holds the number of endpoints which
were selected during RTL generation, we can
use that on our driver.

Signed-off-by: Felipe Balbi <balbi@ti.com>

usb: dwc3: gadget: use num_(in|out)_eps from HW params

that way we will only tell gadget framework about
the endpoints we actually have.

Change-Id: Iabc6a5712b640a9f5b0310984650a4ac44e5f579
Signed-off-by: Felipe Balbi <balbi@ti.com>

usb: gadget: always update HS/SS descriptors and create a copy of them

HS and SS descriptors are staticaly created. They are updated during the
bind process with the endpoint address, string id or interface numbers.

After that, the descriptor chain is linked to struct usb_function which
is used by composite in order to serve the GET_DESCRIPTOR requests,
number of available configs and so on.

There is no need to assign the HS descriptor only if the UDC supports
HS speed because composite won't report those to the host if HS support
has not been reached. The same reasoning is valid for SS.

This patch makes sure each function updates HS/SS descriptors
unconditionally and uses the newly introduced helper function to create a
copy the descriptors for the speed which is supported by the UDC.

While at that, also rename f->descriptors to f->fs_descriptors in order
to make it more explicit what that means.

Change-Id: Id670fcc25b0a1cb3020722cfc6eda2e1b08441f1
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>

USB: Add super speed descriptors for android functions

Update android function drivers like diag, adb, modem, rmnet, mtp
and accessory to operate in super speed.  The burst capability is
not enabled for now.

Change-Id: Ie95cbfc9444c56c8268b70e2916713190699c71a
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>

usb: gadget: Finish conversion to fs_descriptor change

Change-Id: Iaf72d66bb5cd6b84f14c5aaeb01ffb286568c97b

usb: gadget: f_fs: Add support for SuperSpeed Mode

Allow userspace to pass SuperSpeed descriptors and
handle them in the driver accordingly.
This change doesn't modify existing desc_header and thereby
keeps the ABI changes backward compatible i.e. existing
userspace drivers compiled with old header (functionfs.h)
would continue to work with the updated kernel.

Change-Id: Ic27035fdef2a83828024348d75be1518e9f8c5c6
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>

USB: f_fs: Set ffs->func to NULL after disabling endpoint in set_alt()

When adb root is performed, userspace will close and open ffs_epsfile.
Closing this file will call ffs_functionfs_callback() which does call
remove_config(). This will call ffs_function_eps_disable to disable
endpoints and then calls ffs_func_unbind(). Unbind() will also call
endpoint disable which might lead to disabling endpoint which is already
disabled. Hence set ffs->func to NULL after disabling endpoints in
set_alt().

CRs-Fixed: 557532
Change-Id: I3052bdee74a1793d4e003de4b991d353e5d699b0
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>

usb: gadget: throttle IRQ rate for SuperSpeed

There was a merge error from commit 6e0c86d12 "USB: gadget:
u_ether: Fix data stall issue in RNDIS tethering mode"
that resulted in the accidental removal of checking if
the gadget is connected at SuperSpeed. Re-introduce this
check so that IRQs on the downlink path are throttled,
decreasing the load on the CPU.

Change-Id: Ic2aa1d433e0fded95c6e825a760e89f726360522
Signed-off-by: Jack Pham <jackp@codeaurora.org>

USB: mbim: Add super speed descriptors for MBIM function

This change adds super speed descriptors which is required to
get MBIM function to work with SSUSB mode. The burst
capability is not enabled for now.

CRs-Fixed: 626744
Change-Id: I2a492182c94265ab58014cac470448f61782625c
Signed-off-by: Mayank Rana <mrana@codeaurora.org>

usb: gadget: ECM: Add super speed descriptors for qc_ecm function

This change adds super speed descriptors which is required to get
ECM function to work with SSUSB mode.

CRs-Fixed: 627063
Change-Id: I275a32f6cb957b59bfdf1c5b5377ba6e189efb6d
Signed-off-by: Mayank Rana <mrana@codeaurora.org>

usb: gadget: Add file for USB HID function

This file the same as f_hid.c.

Change-Id: I951b3067f477c3cb502c8320693ab11df90150d2
Signed-off-by: muluhe <muluhe@codeaurora.org>
Signed-off-by: Aravind Asam <aasam@codeaurora.org>
Signed-off-by: Ameya Thakur <ameyat@codeaurora.org>

usb: gadget: Enable HID function for charging mode

Provide HID function for only charging mode, in this mode device
enumerated as one input device.

Change-Id: I769adf76807b8a28adcc298de0536fa779176016
Signed-off-by: Mulu He <muluhe@codeaurora.org>

usb: gadget: composite: Fix USB version number for L1

When usb version number is greater than 2.01 USB-CV expects to find a
Super Speed USB Device Capability descriptor. When we want to enable BOS
descriptor capabilities for a high-speed device the USB version number
should be 2.01.

CRs-Fixed: 521752
Change-Id: Ic75b5e570b3c2df8e67370389dfddc8de6fb72d4
Signed-off-by: Shimrit Malichi <smalichi@codeaurora.org>

usb: gadget: Fix compilation of f_mbim driver after SS updates

Change-Id: I72e7dfa5c8f3905bbe57e227ebb7e7035d8b671c
[haggertk: port to samsung_msm8974, don't pick this for your own use]
Signed-off-by: Kevin F. Haggerty <haggertk@lineageos.org>
2019-08-08 15:39:47 +02:00

210 lines
6.2 KiB
C

#ifndef __LINUX_FUNCTIONFS_H__
#define __LINUX_FUNCTIONFS_H__ 1
#include <linux/types.h>
#include <linux/ioctl.h>
#include <linux/usb/ch9.h>
enum {
FUNCTIONFS_DESCRIPTORS_MAGIC = 1,
FUNCTIONFS_STRINGS_MAGIC = 2
};
#define FUNCTIONFS_SS_DESC_MAGIC 0x0055DE5C
#ifndef __KERNEL__
/* Descriptor of an non-audio endpoint */
struct usb_endpoint_descriptor_no_audio {
__u8 bLength;
__u8 bDescriptorType;
__u8 bEndpointAddress;
__u8 bmAttributes;
__le16 wMaxPacketSize;
__u8 bInterval;
} __attribute__((packed));
/*
* All numbers must be in little endian order.
*/
struct usb_functionfs_descs_head {
__le32 magic;
__le32 length;
__le32 fs_count;
__le32 hs_count;
} __attribute__((packed));
/*
* Descriptors format:
*
* | off | name | type | description |
* |-----+-----------+--------------+--------------------------------------|
* | 0 | magic | LE32 | FUNCTIONFS_{FS,HS}_DESCRIPTORS_MAGIC |
* | 4 | length | LE32 | length of the whole data chunk |
* | 8 | fs_count | LE32 | number of full-speed descriptors |
* | 12 | hs_count | LE32 | number of high-speed descriptors |
* | 16 | fs_descrs | Descriptor[] | list of full-speed descriptors |
* | | hs_descrs | Descriptor[] | list of high-speed descriptors |
* | | ss_magic | LE32 | FUNCTIONFS_SS_DESC_MAGIC |
* | | ss_count | LE32 | number of super-speed descriptors |
* | | ss_descrs | Descriptor[] | list of super-speed descriptors |
*
* ss_magic: if present then it implies that SS_DESCs are also present
* descs are just valid USB descriptors and have the following format:
*
* | off | name | type | description |
* |-----+-----------------+------+--------------------------|
* | 0 | bLength | U8 | length of the descriptor |
* | 1 | bDescriptorType | U8 | descriptor type |
* | 2 | payload | | descriptor's payload |
*/
struct usb_functionfs_strings_head {
__le32 magic;
__le32 length;
__le32 str_count;
__le32 lang_count;
} __attribute__((packed));
/*
* Strings format:
*
* | off | name | type | description |
* |-----+------------+-----------------------+----------------------------|
* | 0 | magic | LE32 | FUNCTIONFS_STRINGS_MAGIC |
* | 4 | length | LE32 | length of the data chunk |
* | 8 | str_count | LE32 | number of strings |
* | 12 | lang_count | LE32 | number of languages |
* | 16 | stringtab | StringTab[lang_count] | table of strings per lang |
*
* For each language there is one stringtab entry (ie. there are lang_count
* stringtab entires). Each StringTab has following format:
*
* | off | name | type | description |
* |-----+---------+-------------------+------------------------------------|
* | 0 | lang | LE16 | language code |
* | 2 | strings | String[str_count] | array of strings in given language |
*
* For each string there is one strings entry (ie. there are str_count
* string entries). Each String is a NUL terminated string encoded in
* UTF-8.
*/
#endif
/*
* Events are delivered on the ep0 file descriptor, when the user mode driver
* reads from this file descriptor after writing the descriptors. Don't
* stop polling this descriptor.
*/
enum usb_functionfs_event_type {
FUNCTIONFS_BIND,
FUNCTIONFS_UNBIND,
FUNCTIONFS_ENABLE,
FUNCTIONFS_DISABLE,
FUNCTIONFS_SETUP,
FUNCTIONFS_SUSPEND,
FUNCTIONFS_RESUME
};
/* NOTE: this structure must stay the same size and layout on
* both 32-bit and 64-bit kernels.
*/
struct usb_functionfs_event {
union {
/* SETUP: packet; DATA phase i/o precedes next event
*(setup.bmRequestType & USB_DIR_IN) flags direction */
struct usb_ctrlrequest setup;
} __attribute__((packed)) u;
/* enum usb_functionfs_event_type */
__u8 type;
__u8 _pad[3];
} __attribute__((packed));
/* Endpoint ioctls */
/* The same as in gadgetfs */
/* IN transfers may be reported to the gadget driver as complete
* when the fifo is loaded, before the host reads the data;
* OUT transfers may be reported to the host's "client" driver as
* complete when they're sitting in the FIFO unread.
* THIS returns how many bytes are "unclaimed" in the endpoint fifo
* (needed for precise fault handling, when the hardware allows it)
*/
#define FUNCTIONFS_FIFO_STATUS _IO('g', 1)
/* discards any unclaimed data in the fifo. */
#define FUNCTIONFS_FIFO_FLUSH _IO('g', 2)
/* resets endpoint halt+toggle; used to implement set_interface.
* some hardware (like pxa2xx) can't support this.
*/
#define FUNCTIONFS_CLEAR_HALT _IO('g', 3)
/* Specific for functionfs */
/*
* Returns reverse mapping of an interface. Called on EP0. If there
* is no such interface returns -EDOM. If function is not active
* returns -ENODEV.
*/
#define FUNCTIONFS_INTERFACE_REVMAP _IO('g', 128)
/*
* Returns real bEndpointAddress of an endpoint. If function is not
* active returns -ENODEV.
*/
#define FUNCTIONFS_ENDPOINT_REVMAP _IO('g', 129)
/*
* Returns endpoint descriptor. If function is not active returns -ENODEV.
*/
#define FUNCTIONFS_ENDPOINT_DESC _IOR('g', 130, \
struct usb_endpoint_descriptor)
#ifdef __KERNEL__
struct ffs_data;
struct usb_composite_dev;
struct usb_configuration;
static int functionfs_init(void) __attribute__((warn_unused_result));
static void functionfs_cleanup(void);
static int functionfs_bind(struct ffs_data *ffs, struct usb_composite_dev *cdev)
__attribute__((warn_unused_result, nonnull));
static void functionfs_unbind(struct ffs_data *ffs)
__attribute__((nonnull));
static int functionfs_bind_config(struct usb_composite_dev *cdev,
struct usb_configuration *c,
struct ffs_data *ffs)
__attribute__((warn_unused_result, nonnull));
static int functionfs_ready_callback(struct ffs_data *ffs)
__attribute__((warn_unused_result, nonnull));
static void functionfs_closed_callback(struct ffs_data *ffs)
__attribute__((nonnull));
static int functionfs_check_dev_callback(const char *dev_name)
__attribute__((warn_unused_result, nonnull));
#endif
#endif