forked from rubenslte/android_kernel_samsung_msm8226
prototype74
81ee867ea2
Signed-off-by: Francescodario Cuzzocrea <bosconovic@gmail.com> Change-Id: Ie774042c61fee9df7d78d5d09fffa10a0ba11970
567 lines
14 KiB
Devicetree
567 lines
14 KiB
Devicetree
/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
/include/ "dsi-panel-s6e8aa0a-720p-video.dtsi"
|
|
/include/ "msm8226-camera-sensor-mtp-s3ve-r01.dtsi"
|
|
/include/ "msm8226-tsu6721.dtsi"
|
|
/*/include/ "msm8226-s3ve-sensor-r01.dtsi"*/
|
|
|
|
&soc {
|
|
serial@f991f000 {
|
|
status = "ok"
|
|
};
|
|
|
|
i2c@f9925000 {
|
|
pn547@2B {
|
|
compatible = "pn547";
|
|
reg = <0x2B>;
|
|
interrupt-parent = <&msmgpio>;
|
|
interrupts = <21 0>;
|
|
pn547,irq-gpio = <&msmgpio 21 0x00>;
|
|
pn547,ven-gpio = <&msmgpio 20 0x1>;
|
|
pn547,firm-gpio = <&msmgpio 62 0x00>;
|
|
pn547,clk_req_gpio = <&msmgpio 50 0x0>;
|
|
};
|
|
};
|
|
|
|
samsung,vibrator {
|
|
compatible = "vibrator";
|
|
samsung,vib_pwm_gpio = <&msmgpio 33 0>;
|
|
samsung,vib_model = <1>;
|
|
samsung,pmic_vib_en = <0>;
|
|
samsung,pmic_haptic_pwr_en = <0>;
|
|
samsung,is_pmic_vib_pwm = <0>;
|
|
samsung,is_pmic_vib_en = <0>;
|
|
samsung,pwm_period_us = <40>;
|
|
samsung,duty_us = <36>;
|
|
samsung,drv2603_en = <&msmgpio 111 0>;
|
|
status = "ok"
|
|
};
|
|
|
|
i2c@f9924000 { /* BLSP1 QUP2 */
|
|
mpu6500_input@68 {
|
|
compatible = "invensense,mpu_6500";
|
|
reg = <0x68>;
|
|
interrupt-parent = <&msmgpio>;
|
|
interrupts = <64 0>;
|
|
invensense,i2c-pull-up = <1>;
|
|
invensense-i2c,reg_vdd = "8226_l19";
|
|
invensense-i2c,reg_vio = "8226_lvs1";
|
|
invensense,irq-gpio= <&msmgpio 64 0x1>;
|
|
invensense,scl-gpio = <&msmgpio 7 0x00>;
|
|
invensense,sda-gpio = <&msmgpio 6 0x00>;
|
|
invensense,acc_cal_path = "/efs/calibration_data";
|
|
invensense,gyro_cal_path = "/efs/gyro_cal_data";
|
|
};
|
|
geomagnetic@2e {
|
|
compatible = "yamaha,yas532";
|
|
reg = <0x2e>;
|
|
interrupt-parent = <&msmgpio>;
|
|
interrupts = <66 0>;
|
|
yas532-i2c,irq_gpio = <&msmgpio 66 0x1>;
|
|
yas532-i2c,reg_vdd = "8226_l19";
|
|
yas532-i2c,reg_vio = "8226_lvs1";
|
|
};
|
|
};
|
|
|
|
i2c@f9927000 { /* BLSP1 QUP5 */
|
|
// compatible = "qcom,i2c-qup";
|
|
// qcom,scl-gpio = <&msmgpio 19 0>;
|
|
// qcom,sda-gpio = <&msmgpio 18 0>;
|
|
|
|
// qcom,i2c-bus-freq = <400000>;
|
|
|
|
mms144_ts@48 {
|
|
compatible = "melfas,mms-ts";
|
|
reg = <0x48>;
|
|
interrupt-parent = <&msmgpio>;
|
|
interrupts = <17 0>;
|
|
vdd_en-gpio = <&msmgpio 31 0x01>;
|
|
vcc_i2c-supply = <&pm8226_lvs1>;
|
|
melfas,scl-gpio = <&msmgpio 19 0x00>;
|
|
melfas,sda-gpio = <&msmgpio 18 0x00>;
|
|
melfas,irq-gpio = <&msmgpio 17 0x00>;
|
|
melfas,panel-coords = <0 0 720 1280>;
|
|
melfas,config_fw_version = "melfas mms144";
|
|
melfas,i2c-pull-up = <1>;
|
|
};
|
|
};
|
|
|
|
i2c@23 {
|
|
cell-index = <23>;
|
|
compatible = "i2c-gpio";
|
|
gpios = <&msmgpio 23 0 /* sda */
|
|
&msmgpio 16 0 /* scl */
|
|
>;
|
|
i2c-gpio,delay-us = <2>;
|
|
an30259a@30 {
|
|
compatible = "an30259a,led";
|
|
reg = <0x30>;
|
|
};
|
|
cm36651@18{
|
|
compatible = "capella,cm36651";
|
|
reg = <0x18>;
|
|
interrupt-parent = <&msmgpio>;
|
|
interupts= <65 0>;
|
|
cm36651,vdd_en-gpio = <&msmgpio 110 0>;
|
|
cm36651,p_out-gpio = <&msmgpio 65 0>;
|
|
cm36651,prox_cal_path = "/efs/prox_cal";
|
|
cm36651,vdd_2p85 = "8226_l19";
|
|
cm36651,version = <1>;
|
|
};
|
|
|
|
};
|
|
|
|
i2c@21 {
|
|
cell-index = <21>;
|
|
compatible = "i2c-gpio";
|
|
gpios = <&msmgpio 114 0 /* sda */
|
|
&msmgpio 66 0 /* scl */
|
|
>;
|
|
|
|
cypress_touchkey@20 {
|
|
compatible = "cypress,cypress-tkey";
|
|
reg = <0x20>;
|
|
interrupt-parent = <&msmgpio>;
|
|
interrupts = <49 0>;
|
|
vdd_led-gpio = <&msmgpio 56 0x1>;
|
|
// vcc_en-supply = <&pm8226_lvs1>;
|
|
vdd_en-gpio = <&msmgpio 67 0x01>;
|
|
cypress,scl-gpio = <&msmgpio 66 0x00>;
|
|
cypress,sda-gpio = <&msmgpio 114 0x00>;
|
|
cypress,irq-gpio = <&msmgpio 49 0x1>;
|
|
cypress,tkey-keycodes = <158 139>;
|
|
cypress,i2c-pull-up = <1>;
|
|
};
|
|
};
|
|
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
input-name = "gpio-keys";
|
|
|
|
home_key {
|
|
label = "home_key";
|
|
gpios = <&msmgpio 108 0x1>;
|
|
linux,input-type = <1>;
|
|
linux,code = <102>;
|
|
gpio-key,wakeup;
|
|
debounce-interval = <15>;
|
|
};
|
|
|
|
vol_down {
|
|
label = "volume_down";
|
|
gpios = <&msmgpio 107 0x1>;
|
|
linux,input-type = <1>;
|
|
linux,code = <114>;
|
|
gpio-key,wakeup;
|
|
debounce-interval = <15>;
|
|
};
|
|
|
|
vol_up {
|
|
label = "volume_up";
|
|
gpios = <&msmgpio 106 0x1>;
|
|
linux,input-type = <1>;
|
|
linux,code = <115>;
|
|
gpio-key,wakeup;
|
|
debounce-interval = <15>;
|
|
};
|
|
};
|
|
alps {
|
|
compatible = "alps-input";
|
|
};
|
|
spi@f9923000 {
|
|
ethernet-switch@3 {
|
|
compatible = "micrel,ks8851";
|
|
reg = <3>;
|
|
interrupt-parent = <&msmgpio>;
|
|
interrupts = <115 0x8>;
|
|
spi-max-frequency = <4800000>;
|
|
rst-gpio = <&msmgpio 114 0>;
|
|
vdd-io-supply = <&pm8226_lvs1>;
|
|
vdd-phy-supply = <&pm8226_lvs1>;
|
|
};
|
|
};
|
|
|
|
sound {
|
|
qcom,audio-routing =
|
|
"RX_BIAS", "MCLK",
|
|
"LDO_H", "MCLK",
|
|
"SPK_OUT", "MCLK",
|
|
"SPK_OUT", "EXT_VDD_SPKR",
|
|
"AMIC1", "MIC BIAS1 External",
|
|
"MIC BIAS1 External", "Handset Mic",
|
|
"AMIC2", "MIC BIAS2 External",
|
|
"MIC BIAS2 External", "Headset Mic",
|
|
"AMIC3", "MIC BIAS1 External",
|
|
"MIC BIAS1 External", "ANCRight Headset Mic",
|
|
"AMIC4", "MIC BIAS2 External",
|
|
"MIC BIAS2 External", "ANCLeft Headset Mic";
|
|
|
|
qcom,cdc-mclk-gpios = <&pm8226_gpios 1 0>;
|
|
/*qcom,cdc-vdd-spkr-gpios = <&pm8226_gpios 2 0>;*/
|
|
};
|
|
};
|
|
|
|
&usb_otg {
|
|
#address-cells = <0>;
|
|
interrupt-parent = <&usb_otg>;
|
|
interrupts = <0 1 2>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0xffffffff>;
|
|
interrupt-map = <0 &intc 0 134 0
|
|
1 &intc 0 140 0
|
|
2 &spmi_bus 0x0 0x0 0x9 0x0>;
|
|
interrupt-names = "core_irq", "async_irq", "pmic_id_irq";
|
|
|
|
qcom,hsusb-otg-mode = <3>;
|
|
vbus_otg-supply = <&pm8226_chg_otg>;
|
|
};
|
|
|
|
&sdcc1 {
|
|
vdd-supply = <&pm8226_l17>;
|
|
qcom,vdd-voltage-level = <2950000 2950000>;
|
|
qcom,vdd-current-level = <800 500000>;
|
|
|
|
vdd-io-supply = <&pm8226_l6>;
|
|
qcom,vdd-io-always-on;
|
|
qcom,vdd-io-voltage-level = <1800000 1800000>;
|
|
qcom,vdd-io-current-level = <250 154000>;
|
|
|
|
qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
|
|
qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
|
|
qcom,pad-drv-on = <0x4 0x4 0x4>; /* 10mA, 10mA, 10mA */
|
|
qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */
|
|
|
|
qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>;
|
|
qcom,sup-voltages = <2950 2950>;
|
|
|
|
qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v";
|
|
qcom,nonremovable;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
&sdhc_1 {
|
|
vdd-supply = <&pm8226_l17>;
|
|
qcom,vdd-voltage-level = <2950000 2950000>;
|
|
qcom,vdd-current-level = <800 500000>;
|
|
|
|
vdd-io-supply = <&pm8226_l6>;
|
|
qcom,vdd-io-always-on;
|
|
qcom,vdd-io-voltage-level = <1800000 1800000>;
|
|
qcom,vdd-io-current-level = <250 154000>;
|
|
|
|
qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
|
|
qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
|
|
qcom,pad-drv-on = <0x4 0x4 0x4>; /* 10mA, 10mA, 10mA */
|
|
qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */
|
|
|
|
qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>;
|
|
qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v";
|
|
qcom,nonremovable;
|
|
|
|
status = "ok"
|
|
};
|
|
|
|
&sdcc2 {
|
|
vdd-supply = <&pm8226_l18>;
|
|
qcom,vdd-voltage-level = <2950000 2950000>;
|
|
qcom,vdd-current-level = <9000 800000>;
|
|
|
|
vdd-io-supply = <&pm8226_l21>;
|
|
qcom,vdd-io-voltage-level = <1800000 2950000>;
|
|
qcom,vdd-io-current-level = <6 22000>;
|
|
|
|
qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
|
|
qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
|
|
qcom,pad-drv-on = <0x4 0x4 0x4>; /* 10mA, 10mA, 10mA */
|
|
qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */
|
|
|
|
qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>;
|
|
qcom,sup-voltages = <2950 2950>;
|
|
|
|
qcom,xpc;
|
|
qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104";
|
|
qcom,current-limit = <600>; #address-cells = <0>; interrupt-parent = <&sdcc2>;
|
|
interrupts = <0 1 2>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0xffffffff>;
|
|
interrupt-map = <0 &intc 0 125 0
|
|
1 &intc 0 220 0
|
|
2 &msmgpio 38 0x3>;
|
|
interrupt-names = "core_irq", "bam_irq", "status_irq";
|
|
cd-gpios = <&msmgpio 38 0x1>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
&sdhc_2 {
|
|
vdd-supply = <&pm8226_l18>;
|
|
qcom,vdd-voltage-level = <2950000 2950000>;
|
|
qcom,vdd-current-level = <9000 800000>;
|
|
|
|
vdd-io-supply = <&pm8226_l21>;
|
|
qcom,vdd-io-voltage-level = <1800000 2950000>;
|
|
qcom,vdd-io-current-level = <6 22000>;
|
|
|
|
qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
|
|
qcom,pad-pull-off = <0x0 0x1 0x1>; /* no-pull, pull-down, pull-down */
|
|
qcom,pad-drv-on = <0x4 0x4 0x4>; /* 10mA, 10mA, 10mA */
|
|
qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */
|
|
|
|
qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>;
|
|
|
|
#address-cells = <0>;
|
|
interrupt-parent = <&sdhc_2>;
|
|
interrupts = <0 1 2>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0xffffffff>;
|
|
interrupt-map = <0 &intc 0 125 0
|
|
1 &intc 0 221 0
|
|
2 &msmgpio 38 0x3>;
|
|
interrupt-names = "hc_irq", "pwr_irq", "status_irq";
|
|
cd-gpios = <&msmgpio 38 0x1>;
|
|
|
|
status = "ok"
|
|
};
|
|
|
|
&spmi_bus {
|
|
qcom,pm8226@0 {
|
|
pm8226_chg: qcom,charger {
|
|
qcom,ext-ovp-present = <0>;
|
|
};
|
|
|
|
qcom,leds@a300 {
|
|
status = "okay";
|
|
qcom,led_mpp_4 {
|
|
label = "mpp";
|
|
linux,name = "button-backlight1";
|
|
linux,default-trigger = "none";
|
|
qcom,default-state = "off";
|
|
qcom,max-current = <40>;
|
|
qcom,current-setting = <5>;
|
|
qcom,id = <6>;
|
|
qcom,mode = "pwm";
|
|
qcom,pwm-us = <1000>;
|
|
qcom,source-sel = <8>;
|
|
qcom,mode-ctrl = <0x60>;
|
|
qcom,pwm-channel = <0>;
|
|
qcom,start-idx = <1>;
|
|
qcom,ramp-step-ms = <120>;
|
|
qcom,duty-pcts = [00 00 00 00 00
|
|
00 00 00 00 00
|
|
50 00 00 00 00
|
|
00 00 00 00 00
|
|
00];
|
|
qcom,use-blink;
|
|
};
|
|
};
|
|
|
|
qcom,leds@a500 {
|
|
status = "okay";
|
|
qcom,led_mpp_6 {
|
|
label = "mpp";
|
|
linux,name = "button-backlight2";
|
|
linux,default-trigger = "none";
|
|
qcom,default-state = "off";
|
|
qcom,max-current = <40>;
|
|
qcom,current-setting = <5>;
|
|
qcom,id = <6>;
|
|
qcom,mode = "pwm";
|
|
qcom,pwm-us = <1000>;
|
|
qcom,mode-ctrl = <0x60>;
|
|
qcom,source-sel = <10>;
|
|
qcom,pwm-channel = <5>;
|
|
qcom,start-idx = <1>;
|
|
qcom,ramp-step-ms = <120>;
|
|
qcom,duty-pcts = [00 00 00 00 00
|
|
00 00 00 00 00
|
|
50 00 00 00 00
|
|
00 00 00 00 00
|
|
00];
|
|
qcom,use-blink;
|
|
};
|
|
};
|
|
};
|
|
|
|
qcom,pm8226@1 {
|
|
qcom,leds@d300 {
|
|
status = "okay";
|
|
};
|
|
|
|
qcom,leds@d800 {
|
|
status = "disabled"; /*If WLED is not used for Backlight control*/
|
|
qcom,wled_0 { /*for TFT Panel, this to be disabled */
|
|
label = "wled";
|
|
linux,name = "wled:backlight";
|
|
linux,default-trigger = "bkl-trigger";
|
|
qcom,cs-out-en;
|
|
qcom,op-fdbck = <1>;
|
|
qcom,default-state = "off";
|
|
qcom,max-current = <20>;
|
|
qcom,ctrl-delay-us = <0>;
|
|
qcom,boost-curr-lim = <3>;
|
|
qcom,cp-sel = <0>;
|
|
qcom,switch-freq = <11>;
|
|
qcom,ovp-val = <0>;
|
|
qcom,num-strings = <1>;
|
|
qcom,id = <0>;
|
|
};
|
|
};
|
|
qcom,vibrator@c000 {
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
|
|
&pm8226_gpios {
|
|
gpio@c000 { /* GPIO 1 */
|
|
/* XO_PMIC_CDC_MCLK enable for tapan codec */
|
|
qcom,mode = <1>; /* Digital output */
|
|
qcom,output-type = <0>; /* CMOS logic */
|
|
qcom,pull = <5>; /* QPNP_PIN_PULL_NO*/
|
|
qcom,vin-sel = <3>; /* QPNP_PIN_VIN3 */
|
|
qcom,out-strength = <3>;/* QPNP_PIN_OUT_STRENGTH_HIGH */
|
|
qcom,src-sel = <2>; /* QPNP_PIN_SEL_FUNC_1 */
|
|
qcom,master-en = <1>; /* Enable GPIO */
|
|
};
|
|
|
|
gpio@c100 { /* GPIO 2 */
|
|
qcom,mode = <1>;
|
|
qcom,output-type = <0>;
|
|
qcom,pull = <5>;
|
|
qcom,vin-sel = <3>;
|
|
qcom,out-strength = <3>;
|
|
qcom,src-sel = <2>;
|
|
qcom,master-en = <1>;
|
|
};
|
|
|
|
gpio@c200 { /* GPIO 3 */
|
|
qcom,mode = <0>; /* QPNP_PIN_MODE_DIG_IN */
|
|
qcom,pull = <5>; /* QPNP_PIN_PULL_NO */
|
|
qcom,vin-sel = <2>; /* QPNP_PIN_VIN2 */
|
|
qcom,src-sel = <2>; /* QPNP_PIN_SEL_FUNC_1 */
|
|
qcom,master-en = <1>;
|
|
};
|
|
|
|
gpio@c300 { /* GPIO 4 */
|
|
};
|
|
|
|
gpio@c400 { /* GPIO 5 */
|
|
};
|
|
|
|
gpio@c500 { /* GPIO 6 */
|
|
};
|
|
|
|
gpio@c600 { /* GPIO 7 */
|
|
};
|
|
|
|
gpio@c700 { /* GPIO 8 */
|
|
};
|
|
};
|
|
|
|
&pm8226_mpps {
|
|
mpp@a000 { /* MPP 1 */
|
|
};
|
|
|
|
mpp@a100 { /* MPP 2 */
|
|
};
|
|
|
|
mpp@a200 { /* MPP 3 */
|
|
};
|
|
|
|
mpp@a300 { /* MPP 4 */
|
|
};
|
|
|
|
mpp@a400 { /* MPP 5 */
|
|
/* PA_THERM0 config */
|
|
qcom,mode = <4>; /* AIN input */
|
|
qcom,invert = <1>; /* Enable MPP */
|
|
qcom,ain-route = <0>; /* AMUX 5 */
|
|
qcom,master-en = <1>;
|
|
qcom,src-sel = <0>; /* Function constant */
|
|
};
|
|
|
|
mpp@a500 { /* MPP 6 */
|
|
};
|
|
|
|
mpp@a600 { /* MPP 7 */
|
|
};
|
|
|
|
mpp@a700 { /* MPP 8 */
|
|
/* PA_THERM1 config */
|
|
qcom,mode = <4>; /* AIN input */
|
|
qcom,invert = <1>; /* Enable MPP */
|
|
qcom,ain-route = <3>; /* AMUX 8 */
|
|
qcom,master-en = <1>;
|
|
qcom,src-sel = <0>; /* Function constant */
|
|
};
|
|
};
|
|
|
|
&pm8226_vadc {
|
|
chan@14 {
|
|
label = "pa_therm0";
|
|
reg = <0x14>;
|
|
qcom,decimation = <0>;
|
|
qcom,pre-div-channel-scaling = <0>;
|
|
qcom,calibration-type = "ratiometric";
|
|
qcom,scale-function = <2>;
|
|
qcom,hw-settle-time = <2>;
|
|
qcom,fast-avg-setup = <0>;
|
|
};
|
|
|
|
chan@17 {
|
|
label = "pa_therm1";
|
|
reg = <0x17>;
|
|
qcom,decimation = <0>;
|
|
qcom,pre-div-channel-scaling = <0>;
|
|
qcom,calibration-type = "ratiometric";
|
|
qcom,scale-function = <2>;
|
|
qcom,hw-settle-time = <2>;
|
|
qcom,fast-avg-setup = <0>;
|
|
};
|
|
};
|
|
|
|
&pm8226_bms {
|
|
status = "ok"
|
|
};
|
|
|
|
&pm8226_chg {
|
|
qcom,charging-disabled;
|
|
};
|
|
|
|
&slim_msm {
|
|
tapan_codec {
|
|
qcom,cdc-micbias1-ext-cap;
|
|
};
|
|
};
|
|
|
|
&rpm_bus {
|
|
rpm-regulator-ldoa15 {
|
|
status = "okay";
|
|
pm8226_l15: regulator-l15 {
|
|
regulator-name = "8226_l15";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
qcom,init-voltage = <3300000>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
};
|
|
|
|
&mdss_mdp {
|
|
qcom,mdss-pref-prim-intf = "dsi";
|
|
};
|
|
|
|
&mdss_dsi0 {
|
|
qcom,dsi-pref-prim-pan = <&dsi_s6e8aa0a_hd_panel>;
|
|
};
|