This is a whole or partial revert of:
49740364548 misc: Import SM-G900F kernel source code
9c66e26930 rtc: alarm: set power_on_alarm again when calling alarm_resume
446d682932 alarm : Fix the race conditions in alarm-dev.c
eeb31ff78d rtc:alarm: remove alarm_shutdown hook in alarm driver
aaf95a368d rtc: alarm: update power_on alarm setting logic
aec339ee1f kernel: alarm: setup the RTC immediately for poweroff alarm
6a5881bcb1 rtc: alarm: Proper handling of spinlock
c83a382633 kernel: alarm: Do not call rtc_alarm_irq_enable in IRQ Disabled context
091c9afe14 kernel: alarm: add dedicated alarm type for poweroff alarm
1b2c1c64aa kernel: alarm: :fix the BUG that device automatically powers on
7289fdd2e0 rtc: alarm: Set power-on alarm 120 sec before actual alarm time
c1b2e47058 rtc: alarm: Add power-on alarm feature
f132c6cf77 Merge commit 'AU_LINUX_ANDROID_ICS.04.00.04.00.126' into msm-3.4
d074fa2796 Merge remote-tracking branch 'common/android-3.0' into msm-3.0
3f2bc4d6eb Initial Contribution
692e468137 rtc alarm: fix bad index when canceling alarms[]
2cd24680f6 rtc: alarm: Update hrtimer if alarm at the head of the queue is reprogrammed
b2a4ab2aa0 rtc: alarm: Don't use save_time_delta.
fa56540eb5 rtc: alarm: Add in-kernel alarm interface
b54b33d0b9 rtc: Add android alarm driver.
Change-Id: Iadf132deb9be432910badffb222177a253de81f5
Signed-off-by: Kevin F. Haggerty <haggertk@lineageos.org>
The power_on alarm might be replaced or cleared during alarm
suspend and resume process.So restore the power_on alarm into RTC
during alarm resume.
Change-Id: I1eefb082f9dfbd78517f3da1cc60a989853555fd
Signed-off-by: Mao Jinlong <c_jmao@codeaurora.org>
There will be race conditions between alarm set and alarm clear if
set_power_on_alarm is out of the lock.But set_power_on_alarm can't
be put into spin_lock. So add it into mutex_lock.
CRs-Fixed: 639115
Change-Id: I1db4836f67174b756c7f9d231f7a39cf0377d2c2
Signed-off-by: Xiaocheng Li <lix@codeaurora.org>
Putting alarm_shutdown into set_power_on_alarm is to set rtc alarm
time immediately after an alarm being set. It can avoid shutting
down unexpectedly before calling alarm_shutdown hook like removing
battery.Then power_on_alarm will be set to rtc twice when an alarm
is created and the device performs shutdown for a power off alarm.
The set process during shutting down is duplicated to the set
process when an alarm is created. So the alarm_shutdown hook become
unnecessary.
CRs-Fixed: 639119
Change-Id: Ie46bcf6f568f04650d94ba40ad6d4521d31a2f96
Signed-off-by: Xiaocheng Li <lix@codeaurora.org>
The previous power_on alarm value should be checked to avoid
cancelling the alarm by mistake.
CRs-fixed: 551966
Change-Id: I4de12265416fab41a9c591d09961c9fef0d25917
Signed-off-by: Xiaocheng Li <lix@codeaurora.org>
The rtc alarm register should be cleared when the rtc irq is
disabled
Change-Id: I97a8bf989ff610093240a6b308a297702da6cb89
Signed-off-by: Xiaocheng Li <lix@codeaurora.org>
RTC Alarm enable bit does not get conserved during
RTC probe function. This patch fixes that issue.
CRs-Fixed: 636652
Change-Id: I28203b8e301510d34d2e726c0bd25e78737f7524
Signed-off-by: Mohit Aggarwal <maggarwa@codeaurora.org>
Currently we setup the RTC for poweroff alarm when the system
performs shutdown. But if the phone is shut down unexpectedly
before that, the poweroff alarm can't work. So we can do that
immediately.
CR-fixed: 532743
Change-Id: Ib26a56fba8cd64efe94f2f07ee232482228429dc
Signed-off-by: Figo Wang <figow@codeaurora.org>
In alarm_shutdown hook, taking interruptible mutex
lock in interrupt disabled context. This patch fixes
alarm_shutdown function to call rtc_read_time and
rtc_set_alarm APIs in interrupt enabled context.
Change-Id: I9392d8908c19365993dccc22504f4b6f83ae8f72
CRs-Fixed: 619657
Signed-off-by: Mohit Aggarwal <maggarwa@codeaurora.org>
Currently RTC driver is not setting the RTC time
correctly. RTC H/w needs to be disabled before the
writes, and then re-enabled after the writes are completed.
Change-Id: I4f66a2ea5b8ba52a5e9dcf21da7a09c36b1c9074
CRs-Fixed: 610221
Signed-off-by: Mohit Aggarwal <maggarwa@codeaurora.org>
Currently shutdown hook of alarm driver is calling
the rtc_alarm_irq_enable API in interrupts disabled
context. So fix the alarm_shutdown function to call
in API rtc_alarm_irq_enable in interrupt enabled context.
CRs-Fixed: 591790
Change-Id: Iebd82482be1dc95c6c978b617e1c18eb36e1b6eb
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Now we use type of RTC_WAKEUP for the poweroff alarm.
Actually lots of other applications also use this type.
But these applications never expect the device will
power on after it has been shut down. So we need to
add dedicated alarm type for the Deskclock or similar
applications.
CRs-fixed: 529674
Change-Id: I9b7911906446daa1aeb5835478c9837f8ef797f2
Signed-off-by: Figo Wang <figow@codeaurora.org>
The value of alarm.time is invalid if we get it by:
memset(&alarm, 0, sizeof(alarm)).
So function of rtc_set_alarm aborts before it really calls into:
rtc->ops->set_alarm.
Then we can`t disable the RTC alarm by that. The result is some
alarms enabled by alarm_suspend are not disabled correctly during
alarm_resume. And device will automatically power on.
CRs-fixed: 524051
Change-Id: Ibc99e62878d17ad4f50325630bf0862207e2cf3f
Signed-off-by: Figo Wang <figow@codeaurora.org>
This will add extra buffer time for booting-up the device before
actual alarm expiration time.
Change-Id: I02cad84c394a6aab943fff37a1a0de56bb511f56
Signed-off-by: Mohit Aggarwal <maggarwa@codeaurora.org>
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
Power-on alarm feature can be enabled/disabled by writing 1/0
to the module parameter exported by driver.
CRs-Fixed: 432312
Change-Id: I2a2337adb2ddc186ec312648b11b6a35ea698856
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
Android does not support powering up of phone through alarm.
Adding shutdown hook in alarm driver which will set alarm while phone
is going down so as to power-up the phone after alarm expiration.
CRs-Fixed: 432312
Change-Id: I21786d264b93f7c0c660823a0a1a221c1b4df7b2
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
As RTC is already enabled from trustzone removing enable operation
from RTC driver.
Change-Id: I1891d2f35a9e595d30a1965d4cf20aedaf83d7d5
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
Drop whitespace, unused Kconfigs, and bad Makefile entries. Undo
code movement, remove dead function, and delete entire files that
we don't compile that make our code divergent from upstream. No
functional difference.
Change-Id: I1150b3d4b317fb5180c5d26e2366dccb28a6bf43
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Changes from upstream code-review during submission weren't
backported. Backport them now.
Change-Id: Id9f3f6316268bf12b9b11e35b18e1866e7cda542
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
A 32 bit RTC is housed inside PMIC. The RTC driver
uses SPMI interface to communicate with the RTC module.
RTC device is divided into two sub-peripherals:
1. RTC read-write peripheral having basic RTC registers.
2. Alarm peripheral for controlling alarm.
RTC peripherals are children of SPMI device and driver
receives it's configuration parameters (such as alarm
powerup feature to powerup phone using alarm interrupt)
from device tree.
Change-Id: I46a2ffc0f6c9c5ee174cf803de19e656da7ce088
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
AU_LINUX_ANDROID_ICS.04.00.04.00.126 from msm-3.0.
First parent is from google/android-3.4.
* commit 'AU_LINUX_ANDROID_ICS.04.00.04.00.126': (8712 commits)
PRNG: Device tree entry for qrng device.
vidc:1080p: Set video core timeout value for Thumbnail mode
msm: sps: improve the debugging support in SPS driver
board-8064 msm: Overlap secure and non secure video firmware heaps.
msm: clock: Add handoff ops for 7x30 and copper XO clocks
msm_fb: display: Wait for external vsync before DTV IOMMU unmap
msm: Fix ciruclar dependency in debug UART settings
msm: gdsc: Add GDSC regulator driver for msm-copper
defconfig: Enable Mobicore Driver.
mobicore: Add mobicore driver.
mobicore: rename variable to lower case.
mobicore: rename folder.
mobicore: add makefiles
mobicore: initial import of kernel driver
ASoC: msm: Add SLIMBUS_2_RX CPU DAI
board-8064-gpio: Update FUNC for EPM SPI CS
msm_fb: display: Remove chicken bit config during video playback
mmc: msm_sdcc: enable the sanitize capability
msm-fb: display: lm2 writeback support on mpq platfroms
msm_fb: display: Disable LVDS phy & pll during panel off
...
Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
Pull timer fix from Thomas Gleixner.
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rtc: Fix possible null pointer dereference in rtc-mpc5121.c
Mark Loard pointed out:
"For example, this beauty from rtc-mpc5121.c in the same update:
...
rtc->rtc = rtc_device_register("mpc5200-rtc", &op->dev,
&mpc5200_rtc_ops, THIS_MODULE);
...
rtc->rtc->uie_unsupported = 1; // <<<< Ooops NULL pointer >>>>
if (IS_ERR(rtc->rtc)) { // <<<< this needs to be earlier >>>>
err = PTR_ERR(rtc->rtc);
goto out_free_irq;
}
..."
This patch moves setting the uie_unsupported flag to after we validate
the rtc->rtc pointer to resolve this.
Reported by: Mark Lord <kernel@teksavvy.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/1335300215-21427-1-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add struct bin_attribute initialization to fix the following bug:
rtc-ds1307 3-0068: rtc core: registered ds1307 as rtc0
BUG: key cfb14fcc not in .data!
------------[ cut here ]------------
WARNING: at kernel/lockdep.c:2986 sysfs_add_file_mode+0x84/0xdc()
Modules linked in:
[<c0018d94>] (unwind_backtrace+0x0/0xf8) from [<c0031f7c>] (warn_slowpath_common+0x4c/0x64)
[<c0031f7c>] (warn_slowpath_common+0x4c/0x64) from [<c0031fb0>] (warn_slowpath_null+0x1c/0x24)
[<c0031fb0>] (warn_slowpath_null+0x1c/0x24) from [<c012f7ac>] (sysfs_add_file_mode+0x84/0xdc)
[<c012f7ac>] (sysfs_add_file_mode+0x84/0xdc) from [<c04b11e4>] (ds1307_probe+0x5e4/0x6ac)
[<c04b11e4>] (ds1307_probe+0x5e4/0x6ac) from [<c036e600>] (i2c_device_probe+0xdc/0x108)
[<c036e600>] (i2c_device_probe+0xdc/0x108) from [<c02cdf84>] (driver_probe_device+0x90/0x210)
[<c02cdf84>] (driver_probe_device+0x90/0x210) from [<c02ce198>] (__driver_attach+0x94/0x98)
[<c02ce198>] (__driver_attach+0x94/0x98) from [<c02cc824>] (bus_for_each_dev+0x50/0x7c)
[<c02cc824>] (bus_for_each_dev+0x50/0x7c) from [<c02cd780>] (bus_add_driver+0x184/0x244)
[<c02cd780>] (bus_add_driver+0x184/0x244) from [<c02ce43c>] (driver_register+0x78/0x12c)
[<c02ce43c>] (driver_register+0x78/0x12c) from [<c03701ac>] (i2c_register_driver+0x2c/0xb4)
[<c03701ac>] (i2c_register_driver+0x2c/0xb4) from [<c0008798>] (do_one_initcall+0x34/0x178)
[<c0008798>] (do_one_initcall+0x34/0x178) from [<c0691860>] (kernel_init+0xdc/0x194)
[<c0691860>] (kernel_init+0xdc/0x194) from [<c0013cf0>] (kernel_thread_exit+0x0/0x8)
Since commit 6992f53349 ("sysfs: Use one lockdep class per sysfs
attribute") this initialization is required.
Reported-by: Stefano Babic <sbabic@denx.de>
Tested-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
RTC stores time and date in several registers. Due to the fact that
these registers can't be read instantaneously, there is a chance that
reading from counting registers gives an error of one minute, one hour,
one day, etc.
To address this issue, the RTC has hardware support to copy the RTC
counting registers to static shadowed registers. The current
implementation does not use this feature, and in a stress test, we can
reproduce this error at a rate of around two times per 300000 readings.
Fix the implementation to ensure that the right snapshot of time is
captured.
Signed-off-by: Konstantin Shlyakhovoy <x0155534@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: linux-omap <linux-omap@vger.kernel.org>
Acked-by: Mykola Oleksiienko <x0174904@ti.com>
Acked-by: Oleksandr Dmytryshyn <oleksandr.dmytryshyn@ti.com>
Acked-by: Graeme Gregory <gg@slimlogic.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Driver data field is a pointer, hence assigning that to an integer results
in compilation warnings.
Fixes following compilation warnings:
drivers/rtc/rtc-s3c.c: In function `s3c_rtc_get_driver_data':
drivers/rtc/rtc-s3c.c:452:3: warning: return makes integer from pointer without a cast [enabled by default]
drivers/rtc/rtc-s3c.c: At top level:
drivers/rtc/rtc-s3c.c:674:3: warning: initialization makes pointer from integer without a cast [enabled by default]
drivers/rtc/rtc-s3c.c:674:3: warning: (near initialization for `s3c_rtc_dt_match[1].data') [enabled by default]
drivers/rtc/rtc-s3c.c:677:3: warning: initialization makes pointer from integer without a cast [enabled by default]
drivers/rtc/rtc-s3c.c:677:3: warning: (near initialization for `s3c_rtc_dt_match[2].data') [enabled by default]
drivers/rtc/rtc-s3c.c:680:3: warning: initialization makes pointer from integer without a cast [enabled by default]
drivers/rtc/rtc-s3c.c:680:3: warning: (near initialization for `s3c_rtc_dt_match[3].data') [enabled by default]
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix this error:
drivers/rtc/rtc-s3c.c: At top level:
drivers/rtc/rtc-s3c.c:671:3: error: request for member `data' in something not a structure or union
drivers/rtc/rtc-s3c.c:674:3: error: request for member `data' in something not a structure or union
drivers/rtc/rtc-s3c.c:677:3: error: request for member `data' in something not a structure or union
drivers/rtc/rtc-s3c.c:680:3: error: request for member `data' in something not a structure or union
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
efi_rtc_init() uses platform_driver_probe(), so there's no need to also
set efi_rtc_driver's probe member (as it won't be used anyway). This
fixes a modpost section mismatch warning (as efi_rtc_probe() validly is
__init).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge batch of fixes from Andrew Morton:
"The simple_open() cleanup was held back while I wanted for laggards to
merge things.
I still need to send a few checkpoint/restore patches. I've been
wobbly about merging them because I'm wobbly about the overall
prospects for success of the project. But after speaking with Pavel
at the LSF conference, it sounds like they're further toward
completion than I feared - apparently davem is at the "has stopped
complaining" stage regarding the net changes. So I need to go back
and re-review those patchs and their (lengthy) discussion."
* emailed from Andrew Morton <akpm@linux-foundation.org>: (16 patches)
memcg swap: use mem_cgroup_uncharge_swap fix
backlight: add driver for DA9052/53 PMIC v1
C6X: use set_current_blocked() and block_sigmask()
MAINTAINERS: add entry for sparse checker
MAINTAINERS: fix REMOTEPROC F: typo
alpha: use set_current_blocked() and block_sigmask()
simple_open: automatically convert to simple_open()
scripts/coccinelle/api/simple_open.cocci: semantic patch for simple_open()
libfs: add simple_open()
hugetlbfs: remove unregister_filesystem() when initializing module
drivers/rtc/rtc-88pm860x.c: fix rtc irq enable callback
fs/xattr.c:setxattr(): improve handling of allocation failures
fs/xattr.c:listxattr(): fall back to vmalloc() if kmalloc() failed
fs/xattr.c: suppress page allocation failure warnings from sys_listxattr()
sysrq: use SEND_SIG_FORCED instead of force_sig()
proc: fix mount -t proc -o AAA
Merge Upstream's stable 3.0.21 branch into msm-3.0
This consists 814 commits and some merge conflicts.
The merge conflicts are because of some local changes to
msm-3.0 as well as some conflicts between google's tree and
the upstream tree.
Conflicts:
arch/arm/kernel/head.S
drivers/bluetooth/ath3k.c
drivers/bluetooth/btusb.c
drivers/mmc/core/core.c
drivers/tty/serial/serial_core.c
drivers/usb/host/ehci-hub.c
drivers/usb/serial/qcserial.c
fs/namespace.c
fs/proc/base.c
Change-Id: I62e2edbe213f84915e27f8cd6e4f6ce23db22a21
Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org>
Pull "ARM: cleanups of io includes" from Olof Johansson:
"Rob Herring has done a sweeping change cleaning up all of the
mach/io.h includes, moving some of the oft-repeated macros to a common
location and removing a bunch of boiler plate. This is another step
closer to a common zImage for multiple platforms."
Fix up various fairly trivial conflicts (<mach/io.h> removal vs changes
around it, tegra localtimer.o is *still* gone, yadda-yadda).
* tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits)
ARM: tegra: Include assembler.h in sleep.S to fix build break
ARM: pxa: use common IOMEM definition
ARM: dma-mapping: convert ARCH_HAS_DMA_SET_COHERENT_MASK to kconfig symbol
ARM: __io abuse cleanup
ARM: create a common IOMEM definition
ARM: iop13xx: fix missing declaration of iop13xx_init_early
ARM: fix ioremap/iounmap for !CONFIG_MMU
ARM: kill off __mem_pci
ARM: remove bunch of now unused mach/io.h files
ARM: make mach/io.h include optional
ARM: clps711x: remove unneeded include of mach/io.h
ARM: dove: add explicit include of dove.h to addr-map.c
ARM: at91: add explicit include of hardware.h to uncompressor
ARM: ep93xx: clean-up mach/io.h
ARM: tegra: clean-up mach/io.h
ARM: orion5x: clean-up mach/io.h
ARM: davinci: remove unneeded mach/io.h include
[media] davinci: remove includes of mach/io.h
ARM: OMAP: Remove remaining includes for mach/io.h
ARM: msm: clean-up mach/io.h
...
Pull timer core updates from Thomas Gleixner.
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ia64: vsyscall: Add missing paranthesis
alarmtimer: Don't call rtc_timer_init() when CONFIG_RTC_CLASS=n
x86: vdso: Put declaration before code
x86-64: Inline vdso clock_gettime helpers
x86-64: Simplify and optimize vdso clock_gettime monotonic variants
kernel-time: fix s/then/than/ spelling errors
time: remove no_sync_cmos_clock
time: Avoid scary backtraces when warning of > 11% adj
alarmtimer: Make sure we initialize the rtctimer
ntp: Fix leap-second hrtimer livelock
x86, tsc: Skip refined tsc calibration on systems with reliable TSC
rtc: Provide flag for rtc devices that don't support UIE
ia64: vsyscall: Use seqcount instead of seqlock
x86: vdso: Use seqcount instead of seqlock
x86: vdso: Remove bogus locking in update_vsyscall_tz()
time: Remove bogus comments
time: Fix change_clocksource locking
time: x86: Fix race switching from vsyscall to non-vsyscall clock
Merge Google's Android tree into msm-3.0
This consists of the following conflicts and 42 commits:
Conflicts:
drivers/mmc/core/bus.c
drivers/rtc/class.c
drivers/usb/gadget/android.c
Most of the conflicts stem from the changes made to the
local msm-3.0 branch.
commit 1f8c5cecfe
Author: Heiko Stuebner <heiko@sntech.de>
Date: Wed Feb 1 10:33:01 2012 -0800
Input: evdev - fix variable initialisation
Commit 509f87c5f5 (evdev - do not block waiting for an event if
fd
is nonblock) created a code path were it was possible to use retval
uninitialized.
This could lead to the xorg evdev input driver getting corrupt data
and refusing to work with log messages like
AUO-Pixcir touchscreen: Read error: Success
sg060_keys: Read error: Success
AUO-Pixcir touchscreen: Read error: Success
sg060_keys: Read error: Success
(for drivers auo-pixcir-ts and gpio-keys).
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
drivers/input/evdev.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
commit 4dc43d7079
Author: Arve Hjønnevåg <arve@android.com>
Date: Fri Oct 17 15:20:55 2008 -0700
Input: evdev - Add ioctl to block suspend while event queue is not empty.
Add an ioctl, EVIOCSSUSPENDBLOCK, to enable a wakelock that will block
suspend while the event queue is not empty. This allows userspace code to
process input events while the device appears to be asleep.
The current code holds the wakelock for up 5 seconds for every input
device and client. This can prevent suspend if sensor with a high data
rate is active, even when that sensor is not capable of waking the
device once it is suspended.
Change-Id: I624d66ef30a0b3abb543685c343382b8419b42b9
Signed-off-by: Arve Hjønnevåg <arve@android.com>
drivers/input/evdev.c | 53 +++++++++++++++++++++++++++++++++++++++++++-----
include/linux/input.h | 3 ++
2 files changed, 50 insertions(+), 6 deletions(-)
commit 7cc846069a
Author: Arve Hjønnevåg <arve@android.com>
Date: Mon Jan 23 17:15:45 2012 -0800
Input: evdev - Don't hold wakelock when no data is available to user-space
If there is no SYN_REPORT event in the buffer the buffer data is invisible
to user-space. The wakelock should not be held in this case.
Change-Id: Idae890ff0da8eb46a2cfce61a95b3a97252551ad
Signed-off-by: Arve Hjønnevåg <arve@android.com>
drivers/input/evdev.c | 5 +++--
1 files changed, 3 insertions(+), 2 deletions(-)
commit 0e80804a2e
Author: Dmitry Shmidt <dimitrysh@google.com>
Date: Tue Jan 31 11:06:23 2012 -0800
net: wireless: bcmdhd: Increase pm_notify callback priority
Make pm_notify callback to be called the first on suspend/resume path to
ensure it will always be called.
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
drivers/net/wireless/bcmdhd/dhd_linux.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
commit dfc896e1c8
Author: Dmitry Shmidt <dimitrysh@google.com>
Date: Mon Jan 30 15:43:31 2012 -0800
net: wireless: bcmdhd: Fix crash on dhdsdio_probe_attach() failure
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
drivers/net/wireless/bcmdhd/dhd_linux.c | 17 ++++++++++++++---
drivers/net/wireless/bcmdhd/dhd_sdio.c | 8 +++++++-
2 files changed, 21 insertions(+), 4 deletions(-)
commit 256a6b23be
Author: Dmitry Shmidt <dimitrysh@google.com>
Date: Mon Jan 30 13:03:19 2012 -0800
net: wireless: bcmdhd: Daemonize wl_event_handler
Daemonizing makes thread (besides other things) NON-FREEZABLE, and it will not
get fake signal on suspend to quicl down_interruptible()
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
drivers/net/wireless/bcmdhd/dhd_linux.c | 13 -------------
drivers/net/wireless/bcmdhd/include/linuxver.h | 12 ++++++++++++
drivers/net/wireless/bcmdhd/wl_cfg80211.c | 3 +++
3 files changed, 15 insertions(+), 13 deletions(-)
commit ff93146589
Author: Dmitry Shmidt <dimitrysh@google.com>
Date: Tue Jan 24 13:59:40 2012 -0800
net: wireless: bcmdhd: Update to Version 5.90.195.23
- WFD fixes
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
drivers/net/wireless/bcmdhd/dhd_cfg80211.c | 269 -------------------------
drivers/net/wireless/bcmdhd/dhd_linux.c | 2 +-
drivers/net/wireless/bcmdhd/dhd_sdio.c | 8 +-
drivers/net/wireless/bcmdhd/include/epivers.h | 8 +-
drivers/net/wireless/bcmdhd/siutils.c | 5 +
drivers/net/wireless/bcmdhd/wl_cfg80211.c | 223 +++++++++++++++------
drivers/net/wireless/bcmdhd/wl_cfgp2p.c | 175 ++++++++++++++++-
drivers/net/wireless/bcmdhd/wl_cfgp2p.h | 37 ++--
8 files changed, 368 insertions(+), 359 deletions(-)
commit 96034c2006
Author: Dmitry Shmidt <dimitrysh@google.com>
Date: Tue Jan 24 13:55:00 2012 -0800
net: wireless: bcmdhd: Update to Version 5.90.195.22
- Disable Ad-hoc support for cfg80211
- dhd_linux.c: Fix incorrect pid check
- Merge Android changes from Android tree
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
drivers/net/wireless/bcmdhd/bcmsdh_linux.c | 24 ++------------------
drivers/net/wireless/bcmdhd/bcmsdh_sdmmc_linux.c | 25 +++++++++++++++------
drivers/net/wireless/bcmdhd/dhd_linux.c | 10 ++++----
drivers/net/wireless/bcmdhd/dhd_sdio.c | 11 +++++++--
drivers/net/wireless/bcmdhd/hndpmu.c | 16 ++++++++++++++
drivers/net/wireless/bcmdhd/include/bcmdevs.h | 2 +
drivers/net/wireless/bcmdhd/include/epivers.h | 8 +++---
drivers/net/wireless/bcmdhd/siutils.c | 3 ++
drivers/net/wireless/bcmdhd/wl_cfg80211.c | 11 ++++++++-
9 files changed, 68 insertions(+), 42 deletions(-)
commit 494661a1ac
Author: Dmitry Shmidt <dimitrysh@google.com>
Date: Tue Jan 24 13:47:47 2012 -0800
net: wireless: bcmdhd: Update to Version 5.90.195.19
- Add WFD changes
- Add extra locking for internal ioctl operations
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
drivers/net/wireless/bcmdhd/Makefile | 4 +-
drivers/net/wireless/bcmdhd/bcmsdh_linux.c | 25 +-
drivers/net/wireless/bcmdhd/bcmsdh_sdmmc.c | 4 +-
drivers/net/wireless/bcmdhd/dhd.h | 10 +-
drivers/net/wireless/bcmdhd/dhd_cdc.c | 7 +-
drivers/net/wireless/bcmdhd/dhd_cfg80211.c | 862 ++++++++
drivers/net/wireless/bcmdhd/dhd_cfg80211.h | 42 +
drivers/net/wireless/bcmdhd/dhd_common.c | 7 +-
drivers/net/wireless/bcmdhd/dhd_linux.c | 103 +-
drivers/net/wireless/bcmdhd/dhd_linux_mon.c | 409 ----
drivers/net/wireless/bcmdhd/dhd_sdio.c | 4 +-
drivers/net/wireless/bcmdhd/include/dhdioctl.h | 3 +-
drivers/net/wireless/bcmdhd/include/epivers.h | 8 +-
drivers/net/wireless/bcmdhd/include/proto/802.11.h | 12 +-
drivers/net/wireless/bcmdhd/include/wlioctl.h | 19 +-
drivers/net/wireless/bcmdhd/wl_android.c | 22 +-
drivers/net/wireless/bcmdhd/wl_android.h | 2 +-
drivers/net/wireless/bcmdhd/wl_cfg80211.c | 2142 ++++++--------------
drivers/net/wireless/bcmdhd/wl_cfg80211.h | 125 +-
drivers/net/wireless/bcmdhd/wl_cfgp2p.c | 245 ++-
drivers/net/wireless/bcmdhd/wl_cfgp2p.h | 27 +-
drivers/net/wireless/bcmdhd/wl_linux_mon.c | 409 ++++
drivers/net/wireless/bcmdhd/wldev_common.c | 69 +-
drivers/net/wireless/bcmdhd/wldev_common.h | 20 +-
24 files changed, 2485 insertions(+), 2095 deletions(-)
commit 1dddb0cc0d
Author: Dmitry Shmidt <dimitrysh@google.com>
Date: Tue Jan 24 13:37:34 2012 -0800
net: wireless: bcmdhd: Update to Version 5.90.195.15
- Add WFD concurrent mode support
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
drivers/net/wireless/bcmdhd/bcmevent.c | 8 +-
drivers/net/wireless/bcmdhd/bcmsdh_sdmmc_linux.c | 12 +-
drivers/net/wireless/bcmdhd/bcmutils.c | 4 +-
drivers/net/wireless/bcmdhd/dhd.h | 25 +-
drivers/net/wireless/bcmdhd/dhd_cdc.c | 9 +-
drivers/net/wireless/bcmdhd/dhd_common.c | 4 +-
drivers/net/wireless/bcmdhd/dhd_linux.c | 148 +++--
drivers/net/wireless/bcmdhd/dhd_linux_mon.c | 28 +-
drivers/net/wireless/bcmdhd/dhd_sdio.c | 27 +-
drivers/net/wireless/bcmdhd/dhd_wlfc.h | 12 +-
drivers/net/wireless/bcmdhd/hndpmu.c | 44 +-
drivers/net/wireless/bcmdhd/include/Makefile | 2 +-
drivers/net/wireless/bcmdhd/include/aidmp.h | 2 +-
drivers/net/wireless/bcmdhd/include/bcmcdc.h | 2 +-
drivers/net/wireless/bcmdhd/include/bcmdefs.h | 37 +-
drivers/net/wireless/bcmdhd/include/bcmdevs.h | 573 +++++++++++++-
drivers/net/wireless/bcmdhd/include/bcmendian.h | 2 +-
drivers/net/wireless/bcmdhd/include/bcmpcispi.h | 2 +-
drivers/net/wireless/bcmdhd/include/bcmperf.h | 2 +-
drivers/net/wireless/bcmdhd/include/bcmsdbus.h | 10 +-
drivers/net/wireless/bcmdhd/include/bcmsdh.h | 10 +-
drivers/net/wireless/bcmdhd/include/bcmsdh_sdmmc.h | 2 +-
drivers/net/wireless/bcmdhd/include/bcmsdpcm.h | 2 +-
drivers/net/wireless/bcmdhd/include/bcmsdspi.h | 2 +-
drivers/net/wireless/bcmdhd/include/bcmsdstd.h | 34 +-
drivers/net/wireless/bcmdhd/include/bcmspi.h | 2 +-
drivers/net/wireless/bcmdhd/include/bcmutils.h | 14 +-
drivers/net/wireless/bcmdhd/include/bcmwifi.h | 2 +-
drivers/net/wireless/bcmdhd/include/dhdioctl.h | 2 +-
drivers/net/wireless/bcmdhd/include/epivers.h | 14 +-
drivers/net/wireless/bcmdhd/include/hndpmu.h | 2 +-
.../net/wireless/bcmdhd/include/hndrte_armtrap.h | 2 +-
drivers/net/wireless/bcmdhd/include/hndrte_cons.h | 2 +-
drivers/net/wireless/bcmdhd/include/hndsoc.h | 2 +-
drivers/net/wireless/bcmdhd/include/htsf.h | 2 +-
drivers/net/wireless/bcmdhd/include/linux_osl.h | 2 +-
drivers/net/wireless/bcmdhd/include/linuxver.h | 6 +-
drivers/net/wireless/bcmdhd/include/miniopt.h | 2 +-
drivers/net/wireless/bcmdhd/include/msgtrace.h | 2 +-
drivers/net/wireless/bcmdhd/include/osl.h | 2 +-
.../wireless/bcmdhd/include/packed_section_end.h | 2 +-
.../wireless/bcmdhd/include/packed_section_start.h | 2 +-
drivers/net/wireless/bcmdhd/include/pcicfg.h | 28 +-
drivers/net/wireless/bcmdhd/include/proto/802.11.h | 317 +++++++-
.../net/wireless/bcmdhd/include/proto/802.11_bta.h | 2 +-
.../net/wireless/bcmdhd/include/proto/802.11e.h | 2 +-
drivers/net/wireless/bcmdhd/include/proto/802.1d.h | 2 +-
drivers/net/wireless/bcmdhd/include/proto/bcmeth.h | 2 +-
.../net/wireless/bcmdhd/include/proto/bcmevent.h | 9 +-
drivers/net/wireless/bcmdhd/include/proto/bcmip.h | 2 +-
.../net/wireless/bcmdhd/include/proto/bt_amp_hci.h | 2 +-
drivers/net/wireless/bcmdhd/include/proto/eapol.h | 2 +-
.../net/wireless/bcmdhd/include/proto/ethernet.h | 3 +-
drivers/net/wireless/bcmdhd/include/proto/p2p.h | 2 +-
drivers/net/wireless/bcmdhd/include/proto/sdspi.h | 2 +-
drivers/net/wireless/bcmdhd/include/proto/vlan.h | 2 +-
drivers/net/wireless/bcmdhd/include/proto/wpa.h | 12 +-
drivers/net/wireless/bcmdhd/include/sbchipc.h | 168 ++++-
drivers/net/wireless/bcmdhd/include/sbconfig.h | 2 +-
drivers/net/wireless/bcmdhd/include/sbhnddma.h | 6 +-
drivers/net/wireless/bcmdhd/include/sbpcmcia.h | 2 +-
drivers/net/wireless/bcmdhd/include/sbsdio.h | 2 +-
drivers/net/wireless/bcmdhd/include/sbsdpcmdev.h | 2 +-
drivers/net/wireless/bcmdhd/include/sbsocram.h | 2 +-
drivers/net/wireless/bcmdhd/include/sdio.h | 5 +-
drivers/net/wireless/bcmdhd/include/sdioh.h | 32 +-
drivers/net/wireless/bcmdhd/include/sdiovar.h | 2 +-
drivers/net/wireless/bcmdhd/include/siutils.h | 30 +-
drivers/net/wireless/bcmdhd/include/trxhdr.h | 3 +-
drivers/net/wireless/bcmdhd/include/typedefs.h | 5 +-
drivers/net/wireless/bcmdhd/include/wlfc_proto.h | 2 +-
drivers/net/wireless/bcmdhd/include/wlioctl.h | 87 ++-
drivers/net/wireless/bcmdhd/linux_osl.c | 23 +-
drivers/net/wireless/bcmdhd/siutils.c | 195 +++++-
drivers/net/wireless/bcmdhd/wl_android.c | 6 +-
drivers/net/wireless/bcmdhd/wl_cfg80211.c | 875 ++++++++++++--------
drivers/net/wireless/bcmdhd/wl_cfg80211.h | 282 +++++---
drivers/net/wireless/bcmdhd/wl_cfgp2p.c | 165 ++++-
drivers/net/wireless/bcmdhd/wl_cfgp2p.h | 12 +-
drivers/net/wireless/bcmdhd/wl_iw.c | 110 +++-
drivers/net/wireless/bcmdhd/wl_iw.h | 17 +-
81 files changed, 2737 insertions(+), 752 deletions(-)
commit 52bdb6f543
Author: Dmitry Shmidt <dimitrysh@google.com>
Date: Mon Jan 23 12:47:21 2012 -0800
net: wireless: bcmdhd: Add WIPHY_FLAG_SUPPORTS_FW_ROAM flag
Adding this flag will allow NL80211_ATTR_ROAM_SUPPORT, and will set
WPA_DRIVER_FLAGS_BSS_SELECTION flag in wpa_supplicant
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
drivers/net/wireless/bcmdhd/wl_cfg80211.c | 4 +++-
1 files changed, 3 insertions(+), 1 deletions(-)
commit b1a94205e9
Author: Dmitry Shmidt <dimitrysh@google.com>
Date: Fri Jan 20 14:15:05 2012 -0800
net: wireless: bcmdhd: Fake PNO event to wake up the wpa_supplicant
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
drivers/net/wireless/bcmdhd/dhd_linux.c | 4 +++-
drivers/net/wireless/bcmdhd/wl_cfg80211.c | 20 ++++++++++++++++----
2 files changed, 19 insertions(+), 5 deletions(-)
commit 09701e3edf
Author: Scott Anderson <saa@google.com>
Date: Wed Jan 18 15:56:51 2012 -0800
usb: gadget: android: Honor CONFIG_USB_GADGET_VBUS_DRAW
The maximum current draw was hard coded to 500 mA. composite.c
has code that uses CONFIG_USB_GADGET_VBUS_DRAW to set the
bMaxPower and to set whether or not the device is self-powered if
they haven't been set. This change removes the code in android.c
to allow composite.c to set them.
Change-Id: I9db37922e91ee86e9e5c0e14519e119e5c41ca48
Signed-off-by: Scott Anderson <saa@google.com>
drivers/usb/gadget/android.c | 3 ---
1 files changed, 0 insertions(+), 3 deletions(-)
commit a6ccb73389
Author: Benoit Goby <benoit@android.com>
Date: Fri Jan 20 14:42:41 2012 -0800
usb: gadget: Fix usb string id allocation
Don't reset next_string_id every time the gadget is enabled, this makes
the next strings allocated overwrite strings allocated at probe time.
Instead, fix rndis not to allocate new string ids on every config bind.
Change-Id: Ied28ee416bb6f00c434c34176fe5b7f0dcb2b2d4
Signed-off-by: Benoit Goby <benoit@android.com>
drivers/usb/gadget/android.c | 1 -
drivers/usb/gadget/f_rndis.c | 12 +++++-------
drivers/usb/gadget/rndis.c | 11 +++++++++++
3 files changed, 16 insertions(+), 8 deletions(-)
commit 87159de9c3
Author: Jouni Malinen <jouni@qca.qualcomm.com>
Date: Thu Aug 11 11:46:22 2011 +0300
nl80211/cfg80211: Make addition of new sinfo fields safer
Add a comment pointing out the use of enum station_info_flags for
all new struct station_info fields. In addition, memset the sinfo
buffer to zero before use on all paths in the current tree to avoid
leaving uninitialized pointers in the data.
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
include/net/cfg80211.h | 5 +++++
net/mac80211/sta_info.c | 1 +
net/wireless/nl80211.c | 1 +
3 files changed, 7 insertions(+), 0 deletions(-)
commit d692df224b
Author: Jouni Malinen <jouni@qca.qualcomm.com>
Date: Mon Aug 8 12:11:52 2011 +0300
cfg80211/nl80211: Send AssocReq IEs to user space in AP mode
When user space SME/MLME (e.g., hostapd) is not used in AP mode, the
IEs from the (Re)Association Request frame that was processed in
firmware need to be made available for user space (e.g., RSN IE for
hostapd). Allow this to be done with cfg80211_new_sta().
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
include/net/cfg80211.h | 8 ++++++++
net/wireless/nl80211.c | 4 ++++
2 files changed, 12 insertions(+), 0 deletions(-)
commit d1e94136fc
Author: Dima Zavin <dima@android.com>
Date: Mon Jan 23 10:39:02 2012 -0800
misc: remove android pmem driver, it's obsolete.
Change-Id: I48d9778007e1e9eed2bb34e33ceee818c23afaa5
Signed-off-by: Dima Zavin <dima@android.com>
drivers/misc/Kconfig | 4 -
drivers/misc/Makefile | 1 -
drivers/misc/pmem.c | 1345 ------------------------------------------
include/linux/android_pmem.h | 93 ---
4 files changed, 0 insertions(+), 1443 deletions(-)
commit dac306d896
Author: Dima Zavin <dima@android.com>
Date: Thu Jan 19 09:51:07 2012 -0800
Revert "proc: enable writing to /proc/pid/mem"
This reverts commit 198214a7ee.
fs/proc/base.c | 5 +++++
1 files changed, 5 insertions(+), 0 deletions(-)
commit a65e28a014
Author: Dima Zavin <dima@android.com>
Date: Thu Jan 12 15:55:25 2012 -0800
ram_console: set CON_ANYTIME console flag
We want to ensure that we get all the console messages, even ones
that occur while the printing CPU is not yet online.
Change-Id: I1d2694d05ac9415669a92f38efdd8e71c927705b
Signed-off-by: Dima Zavin <dima@android.com>
drivers/staging/android/ram_console.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
commit f16e6fb3e3
Author: Benoit Goby <benoit@android.com>
Date: Thu Dec 15 18:40:37 2011 -0800
Revert "usb: gadget: rndis: don't use dev_get_stats"
This reverts commit ffdab0c0c4.
Not needed anymore in 2.6.39 and 3.0, dev_get_stats has been fixed
and may be called from atomic context. See:
1ac9ad1 net: remove dev_txq_stats_fold()
drivers/usb/gadget/rndis.c | 23 ++---------------------
1 files changed, 2 insertions(+), 21 deletions(-)
commit e1493f1544
Author: Dmitry Shmidt <dimitrysh@google.com>
Date: Mon Dec 19 10:24:09 2011 -0800
net: wireless: bcmdhd: Enable wlan access on resume for all sdio functions
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
drivers/net/wireless/bcmdhd/bcmsdh_sdmmc_linux.c | 4 +---
1 files changed, 1 insertions(+), 3 deletions(-)
commit bbd08c6e95
Author: Dmitry Shmidt <dimitrysh@google.com>
Date: Fri Dec 16 12:54:51 2011 -0800
net: wireless: bcmdhd: Fix P2P interface removal
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
drivers/net/wireless/bcmdhd/dhd_linux.c | 3 ++
drivers/net/wireless/bcmdhd/wl_cfg80211.c | 43 ++++++++++++++++++++++-------
drivers/net/wireless/bcmdhd/wl_cfg80211.h | 9 ++++--
3 files changed, 42 insertions(+), 13 deletions(-)
commit 37ff4411a5
Author: Dmitry Shmidt <dimitrysh@google.com>
Date: Thu Dec 15 12:12:20 2011 -0800
net: wireless: bcm4329: Fix pno_enable if disassociated
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
drivers/net/wireless/bcm4329/dhd_common.c | 43 ++++++++++++++++++++++++-----
1 files changed, 36 insertions(+), 7 deletions(-)
commit 599c8566fa
Author: Dmitry Shmidt <dimitrysh@google.com>
Date: Tue Dec 13 17:39:48 2011 -0800
net: wireless: bcmdhd: Fix proper scan command even if request is NULL
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
drivers/net/wireless/bcmdhd/wl_cfg80211.c | 16 ++++++++++------
1 files changed, 10 insertions(+), 6 deletions(-)
commit f227b88c89
Author: Dmitry Shmidt <dimitrysh@google.com>
Date: Tue Dec 13 12:27:49 2011 -0800
net: wireless: bcmdhd: Decrease event wake_lock timeout to 1500 ms
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
drivers/net/wireless/bcmdhd/dhd.h | 4 ++--
drivers/net/wireless/bcmdhd/dhd_linux.c | 8 ++++----
drivers/net/wireless/bcmdhd/wl_iw.c | 2 +-
3 files changed, 7 insertions(+), 7 deletions(-)
commit ed3f356087
Author: Dmitry Shmidt <dimitrysh@google.com>
Date: Mon Dec 12 15:40:33 2011 -0800
net: wireless: bcmdhd: Fix getting arp_hostip table
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
drivers/net/wireless/bcmdhd/dhd_common.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
commit c561cedf2b
Author: Dmitry Shmidt <dimitrysh@google.com>
Date: Tue Dec 6 16:27:37 2011 -0800
net: wireless: bcmdhd: Allow to push more packets to FW for Tx
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
drivers/net/wireless/bcmdhd/dhd_sdio.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
commit 4f36cb88d6
Author: Dmitry Shmidt <dimitrysh@google.com>
Date: Fri Dec 2 13:24:01 2011 -0800
net: wireless: bcmdhd: Fix scan crash in ibss mode
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
drivers/net/wireless/bcmdhd/wl_cfg80211.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
commit af16732d4c
Author: Dmitry Shmidt <dimitrysh@google.com>
Date: Fri Dec 2 13:10:47 2011 -0800
net: wireless: bcmdhd: Add FW reloading in case of FW hang
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
drivers/net/wireless/bcmdhd/dhd_linux.c | 5 ++++-
1 files changed, 4 insertions(+), 1 deletions(-)
commit 7caeacd6ed
Author: Dmitry Shmidt <dimitrysh@google.com>
Date: Wed Nov 30 12:49:02 2011 -0800
net: wireless: bcmdhd: Update to Version 5.90.125.94.1
- Return zeroed private command buffer
- Fix memory leak in wl_inform_single_bss()
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
drivers/net/wireless/bcmdhd/dhd_common.c | 5 +++--
drivers/net/wireless/bcmdhd/dhd_linux_mon.c | 10 ++++++----
drivers/net/wireless/bcmdhd/include/epivers.h | 2 +-
drivers/net/wireless/bcmdhd/wl_android.c | 9 ++++++---
drivers/net/wireless/bcmdhd/wl_cfg80211.c | 9 ++++++---
5 files changed, 22 insertions(+), 13 deletions(-)
commit 8d71d882e7
Author: Dmitry Shmidt <dimitrysh@google.com>
Date: Fri Nov 11 16:04:12 2011 -0800
net: wireless: bcmdhd: Use CONFIG_DHD_USE_STATIC_BUF for preallocated memory
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
drivers/net/wireless/bcmdhd/Kconfig | 7 +++
drivers/net/wireless/bcmdhd/bcmsdh_sdmmc.c | 16 ++++----
drivers/net/wireless/bcmdhd/dhd.h | 4 +-
drivers/net/wireless/bcmdhd/dhd_cdc.c | 4 +-
drivers/net/wireless/bcmdhd/dhd_linux.c | 4 +-
drivers/net/wireless/bcmdhd/dhd_sdio.c | 4 +-
drivers/net/wireless/bcmdhd/include/linux_osl.h | 2 +-
drivers/net/wireless/bcmdhd/linux_osl.c | 52 +++++++++++++----------
drivers/net/wireless/bcmdhd/wl_android.c | 7 ++-
9 files changed, 57 insertions(+), 43 deletions(-)
commit 35047200c4
Author: Dmitry Shmidt <dimitrysh@google.com>
Date: Mon Dec 19 12:32:21 2011 -0800
wireless: Protect regdomain change by mutex
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net/wireless/reg.c | 5 ++++-
1 files changed, 4 insertions(+), 1 deletions(-)
commit ea693bf7f8
Author: Dmitry Shmidt <dimitrysh@google.com>
Date: Fri Dec 16 17:52:18 2011 -0800
mmc: Set suspend/resume bus operations if CONFIG_PM_RUNTIME is used
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
drivers/mmc/core/bus.c | 24 +++++++-----------------
1 files changed, 7 insertions(+), 17 deletions(-)
commit dc1b634039
Author: Benoit Goby <benoit@android.com>
Date: Fri Dec 9 18:05:00 2011 -0800
usb: gadget: android: Don't allow changing the functions list if enabled
Change-Id: I3ad39b420ce79a8602a7eca1daac1f56b30bad5c
Signed-off-by: Benoit Goby <benoit@android.com>
drivers/usb/gadget/android.c | 28 ++++++++++++++++++++++++----
1 files changed, 24 insertions(+), 4 deletions(-)
commit e0de0a507d
Author: Benoit Goby <benoit@android.com>
Date: Tue Nov 29 13:49:27 2011 -0800
usb: gadget: android: Cancel pending ctrlrequest before disabling
Make sure there is no pending ctrlrequest before removing the config.
Otherwise the ctrlrequest complete callback could access structures
after they have been freed. Unbind cancels pending transfers but not
ep0 requests.
Bug: 5513065 5440193
Change-Id: I063c22bf5d104a3d2df71cf622409459fac5f27a
Signed-off-by: Benoit Goby <benoit@android.com>
drivers/usb/gadget/android.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
commit b86fd0b622
Author: Colin Cross <ccross@android.com>
Date: Tue Nov 29 16:37:07 2011 -0800
ARM: idle: call idle notifiers before stopping nohz tick
If an idle notifier modifies a timer, calling the notifier after
the sched tick has been stopped may leave the sched tick set too
early. Move teh idle notifier call before the call to
tick_nohz_stop_sched_tick.
Change-Id: I0db3284bec6d0193bc5e2a57650ab06bd8342319
Signed-off-by: Colin Cross <ccross@android.com>
arch/arm/kernel/process.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
commit 6a4a38525d
Author: Benoit Goby <benoit@android.com>
Date: Mon Nov 28 18:01:03 2011 -0800
usb: gadget: android: Reset next_string_id before enable
Reset next_string_id to 0 before enabling the gadget driver. Otherwise,
after a large number of enable/disable cycles, bind will fail
because we cannot allocate new string ids. String ids cannot be larger
than 254 per USB spec.
Change-Id: I44f5fece45008b7a0a18c025d4eb5ce842585c28
Signed-off-by: Benoit Goby <benoit@android.com>
drivers/usb/gadget/android.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
commit dbb18fb2c1
Author: hyungseoung.yoo <hyungseoung.yoo@samsung.com>
Date: Fri Nov 18 13:57:01 2011 +0900
Bluetooth: Keep master role when SCO or eSCO is active
This improves compatbility with a lot of headset / chipset
combinations. Ideally this should not be needed.
Change-Id: I8b676701e12e416aa7d60801b9d353b15d102709
Signed-off-by: hyungseoung.yoo <hyungseoung.yoo@samsung.com>
Signed-off-by: Jaikumar Ganesh <jaikumarg@android.com>
net/bluetooth/hci_event.c | 12 +++++++++++-
1 files changed, 11 insertions(+), 1 deletions(-)
commit 9d187300df
Author: Arve Hjønnevåg <arve@android.com>
Date: Tue Nov 22 14:56:50 2011 -0800
rtc: Fix some bugs that allowed accumulating time drift in suspend/resume
The current code checks if abs(delta_delta.tv_sec) is greater or
equal to two before it discards the old delta value, but this can
trigger at close to -1 seconds since -1.000000001 seconds is stored
as tv_sec -2 and tv_nsec 999999999 in a normalized timespec.
rtc_resume had an early return check if the rtc value had not changed
since rtc_suspend. This effectivly stops time for the duration of the
short sleep. Check if sleep_time is positive after all the adjustments
have been applied instead since this allows the old_system adjustment
in rtc_suspend to have an effect even for short sleep cycles.
Change-Id: I00b45c0349ec91a4bab9b41a126b377515427898
Signed-off-by: Arve Hjønnevåg <arve@android.com>
drivers/rtc/class.c | 10 +++++-----
1 files changed, 5 insertions(+), 5 deletions(-)
commit 452d440ab2
Author: Arve Hjønnevåg <arve@android.com>
Date: Tue Nov 22 15:28:27 2011 -0800
Fix "time: Catch invalid timespec sleep values in __timekeeping_inject_sleeptime" to compile on 3.0
Change-Id: I1225f279cda04dedbfb7f853f6b58f1032bd6d2b
kernel/time/timekeeping.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
commit cf70c6a400
Author: John Stultz <john.stultz@linaro.org>
Date: Wed Jun 1 18:18:09 2011 -0700
time: Catch invalid timespec sleep values in __timekeeping_inject_sleeptime
Arve suggested making sure we catch possible negative sleep time
intervals that could be passed into timekeeping_inject_sleeptime.
CC: Arve Hjønnevåg <arve@android.com>
CC: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
kernel/time/timekeeping.c | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
commit 340ede3671
Author: John Stultz <john.stultz@linaro.org>
Date: Fri May 27 11:33:18 2011 -0700
rtc: Avoid accumulating time drift in suspend/resume
Because the RTC interface is only a second granular interface,
each time we read from the RTC for suspend/resume, we introduce a
half second (on average) of error.
In order to avoid this error accumulating as the system is suspended
over and over, this patch measures the time delta between the RTC
and the system CLOCK_REALTIME.
If the delta is less then 2 seconds from the last suspend, we compensate
by using the previous time delta (keeping it close). If it is larger
then 2 seconds, we assume the clock was set or has been changed, so we
do no correction and update the delta.
Note: If NTP is running, ths could seem to "fight" with the NTP corrected
time, where as if the system time was off by 1 second, and NTP slewed the
value in, a suspend/resume cycle could undo this correction, by trying to
restore the previous offset from the RTC. However, without this patch,
since each read could cause almost a full second worth of error, its
possible to get almost 2 seconds of error just from the suspend/resume
cycle alone, so this about equal to any offset added by the compensation.
Further on systems that suspend/resume frequently, this should keep time
closer then NTP could compensate for if the errors were allowed to
accumulate.
Credits to Arve Hjønnevåg for suggesting this solution.
This patch also improves some of the variable names and adds more clear
comments.
CC: Arve Hjønnevåg <arve@android.com>
CC: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
drivers/rtc/class.c | 65 +++++++++++++++++++++++++++++++++++++-------------
1 files changed, 48 insertions(+), 17 deletions(-)
Change-Id: I16f522e7ee2b301cbdaea62d52d50d7249f565c2
Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org>
Pull MFD changes from Samuel Ortiz:
- 4 new drivers: Freescale i.MX on-chip Anatop, Ricoh's RC5T583 and
TI's TPS65090 and TPS65217.
- New variants support (8420, 8520 ab9540), cleanups and bug fixes for
the abx500 and db8500 ST-E chipsets.
- Some minor fixes and update for the wm8994 from Mark.
- The beginning of a long term TWL cleanup effort coming from the TI
folks.
- Various fixes and cleanups for the s5m, TPS659xx, pm860x, and MAX8997
drivers.
Fix up trivial conflicts due to duplicate patches and header file
cleanups (<linux/device.h> removal etc).
* tag 'mfd_3.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (97 commits)
gpio/twl: Add DT support to gpio-twl4030 driver
gpio/twl: Allocate irq_desc dynamically for SPARSE_IRQ support
mfd: Detach twl6040 from the pmic mfd driver
mfd: Replace twl-* pr_ macros by the dev_ equivalent and do various cleanups
mfd: Micro-optimization on twl4030 IRQ handler
mfd: Make twl4030 SIH SPARSE_IRQ capable
mfd: Move twl-core IRQ allocation into twl[4030|6030]-irq files
mfd: Remove references already defineid in header file from twl-core
mfd: Remove unneeded header from twl-core
mfd: Make twl-core not depend on pdata->irq_base/end
ARM: OMAP2+: board-omap4-*: Do not use anymore TWL6030_IRQ_BASE in board files
mfd: Return twl6030_mmc_card_detect IRQ for board setup
Revert "mfd: Add platform data for MAX8997 haptic driver"
mfd: Add support for TPS65090
mfd: Add some da9052-i2c section annotations
mfd: Build rtc5t583 only if I2C config is selected to y.
mfd: Add anatop mfd driver
mfd: Fix compilation error in tps65910.h
mfd: Add 8420 variant to db8500-prcmu
mfd: Add 8520 PRCMU variant to db8500-prcmu
...
Pull "ARM: More device tree support updates" from Olof Johansson:
"This branch contains a number of updates for device tree support on
several ARM platforms, in particular:
* AT91 continues the device tree conversion adding support for a
number of on-chip drivers and other functionality
* ux500 adds probing of some of the core SoC blocks through device
tree
* Initial device tree support for ST SPEAr600 platforms
* kirkwood continues the conversion to device-tree probing"
Manually merge arch/arm/mach-ux500/Kconfig due to MACH_U8500 rename, and
drivers/usb/gadget/at91_udc.c due to header file include cleanups.
Also do an "evil merge" for the MACH_U8500 config option rename that the
affected RMI4 touchscreen driver in staging. It's called MACH_MOP500
now, and it was missed during previous merges.
* tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
ARM: SPEAr600: Add device-tree support to SPEAr600 boards
ARM: ux500: Provide local timer support for Device Tree
ARM: ux500: Enable PL022 SSP Controller in Device Tree
ARM: ux500: Enable PL310 Level 2 Cache Controller in Device Tree
ARM: ux500: Enable PL011 AMBA UART Controller for Device Tree
ARM: ux500: Enable Cortex-A9 GIC (Generic Interrupt Controller) in Device Tree
ARM: ux500: db8500: list most devices in the snowball device tree
ARM: ux500: split dts file for snowball into generic part
ARM: ux500: combine the board init functions for DT boot
ARM: ux500: Initial Device Tree support for Snowball
ARM: ux500: CONFIG: Enable Device Tree support for future endeavours
ARM: kirkwood: use devicetree for rtc-mv
ARM: kirkwood: rtc-mv devicetree bindings
ARM: kirkwood: fdt: define uart[01] as disabled, enable uart0
ARM: kirkwood: fdt: facilitate new boards during fdt migration
ARM: kirkwood: fdt: absorb kirkwood_init()
ARM: kirkwood: fdt: use mrvl ticker symbol
ARM: orion: wdt: use resource vice direct access
ARM: Kirkwood: Remove tclk from kirkwood_asoc_platform_data.
ARM: orion: spi: remove enable_clock_fix which is not used
...
Pull ARM platform updates from Russell King:
"This covers platform stuff for platforms I have a direct interest in
(iow, I have the hardware). Essentially:
- as we no longer support any other Acorn platforms other than RiscPC
anymore, we can collect all that code into mach-rpc.
- convert Acorn expansion card stuff to use IRQ allocation functions,
and get rid of NO_IRQ from there.
- cleanups to the ebsa110 platform to move some private stuff out of
its header files.
- large amount of SA11x0 updates:
- conversion of private DMA implementation to DMA engine support
(this actually gives us greater flexibility in drivers over the old
API.)
- re-worked ucb1x00 updates - convert to genirq, remove sa11x0
dependencies, fix various minor issues
- move platform specific sa11x0 framebuffer data into platform files
in arch/arm instead of keeping this in the driver itself
- update sa11x0 IrDA driver for DMA engine, and allow it to use DMA
for SIR transmissions as well as FIR
- rework sa1111 support for genirq, and irq allocation
- fix sa1111 IRQ support so it works again
- use sparse IRQ support
After this, I have one more pull request remaining from my current
set, which I think is going to be the most problematical as it
generates 8 conflicts."
Fixed up the trivial conflict in arch/arm/mach-rpc/Makefile as per
Russell.
* 'platforms' of git://git.linaro.org/people/rmk/linux-arm: (125 commits)
ARM: 7343/1: sa11x0: convert to sparse IRQ
ARM: 7342/2: sa1100: prepare for sparse irq conversion
ARM: 7341/1: input: prepare jornada720 keyboard and ts for sa11x0 sparse irq
ARM: 7340/1: rtc: sa1100: include mach/irqs.h instead of asm/irq.h
ARM: sa11x0: remove unused DMA controller definitions
ARM: sa11x0: remove old SoC private DMA driver
USB: sa1111: add hcd .reset method
USB: sa1111: add OHCI shutdown methods
USB: sa1111: reorganize ohci-sa1111.c
USB: sa1111: get rid of nasty printk(KERN_DEBUG "%s: ...", __FILE__)
USB: sa1111: sparse and checkpatch cleanups
ARM: sa11x0: don't static map sa1111
ARM: sa1111: use dev_err() rather than printk()
ARM: sa1111: cleanup sub-device registration and unregistration
ARM: sa1111: only setup DMA for DMA capable devices
ARM: sa1111: register sa1111 devices with dmabounce in bus notifier
ARM: sa1111: move USB interface register definitions to ohci-sa1111.c
ARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.c
ARM: sa1111: move PS/2 interface register definitions to sa1111p2.c
ARM: sa1111: delete unused physical GPIO register definitions
...
Pull "ARM: device tree work" from Arnd Bergmann:
"Most of these patches convert code from using static platform data to
describing the hardware in the device tree. This is only the first
half of the changes for v3.4 because a lot of patches for this topic
came in the last week before the merge window.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>"
Fix up trivial conflicts in arch/arm/mach-vexpress/{Kconfig,core.h}
* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (86 commits)
Document: devicetree: add OF documents for arch-mmp
ARM: dts: append DTS file of pxa168
ARM: mmp: append OF support on pxa168
ARM: mmp: enable rtc clk in pxa168
i2c: pxa: add OF support
serial: pxa: add OF support
arm/dts: mt_ventoux: very basic support for TeeJet Mt.Ventoux board
ARM: OMAP2+: Remove extra ifdefs for board-generic
ARM: OMAP2+: Fix build error when only ARCH_OMAP2/3 or 4 is selected
ASoC: DT: Add digital microphone binding to PAZ00 board.
ARM: dt: Add ARM PMU to tegra*.dtsi
ARM: at91: at91sam9x5cm/dt: add leds support
ARM: at91: usb_a9g20/dt: add gpio-keys support
ARM: at91: at91sam9m10g45ek/dt: add gpio-keys support
ARM: at91: at91sam9m10g45ek/dt: add leds support
ARM: at91: usb_a9g20/dt: add leds support
ARM: at91/pio: add new PIO3 features
ARM: at91: add sam9_smc.o to at91sam9x5 build
ARM: at91/tc/clocksource: Add 32 bit variant to Timer Counter
ARM: at91/tc: add device tree support to atmel_tclib
...
Pull "ARM: driver specific updates" from Arnd Bergmann:
"These are all specific to some driver. They are typically the
platform side of a change in the drivers directory, such as adding a
new driver or extending the interface to the platform. In cases where
there is no maintainer for the driver, or the maintainer prefers to
have the platform changes in the same branch as the driver changes,
the patches to the drivers are included as well.
A much smaller set of driver updates that depend on other branches
getting merged first will be sent later.
The new export of tegra_chip_uid conflicts with other changes in
fuse.c. In rtc-sa1100.c, the global removal of IRQF_DISABLED
conflicts with the cleanup of the interrupt handling of that driver.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>"
Fixed up aforementioned trivial conflicts.
* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (94 commits)
ARM: SAMSUNG: change the name from s3c-sdhci to exynos4-sdhci
mmc: sdhci-s3c: add platform data for the second capability
ARM: SAMSUNG: support the second capability for samsung-soc
ARM: EXYNOS: add support DMA for EXYNOS4X12 SoC
ARM: EXYNOS: Add apb_pclk clkdev entry for mdma1
ARM: EXYNOS: Enable MDMA driver
regulator: Remove bq24022 regulator driver
rtc: sa1100: add OF support
pxa: magician/hx4700: Convert to gpio-regulator from bq24022
ARM: OMAP3+: SmartReflex: fix error handling
ARM: OMAP3+: SmartReflex: fix the use of debugfs_create_* API
ARM: OMAP3+: SmartReflex: micro-optimization for sanity check
ARM: OMAP3+: SmartReflex: misc cleanups
ARM: OMAP3+: SmartReflex: move late_initcall() closer to its argument
ARM: OMAP3+: SmartReflex: add missing platform_set_drvdata()
ARM: OMAP3+: hwmod: add SmartReflex IRQs
ARM: OMAP3+: SmartReflex: clear ERRCONFIG_VPBOUNDINTST only on a need
ARM: OMAP3+: SmartReflex: Fix status masking in ERRCONFIG register
ARM: OMAP3+: SmartReflex: Add a shutdown hook
ARM: OMAP3+: SmartReflex Class3: disable errorgen before disable VP
...
Conflicts:
arch/arm/mach-tegra/Makefile
arch/arm/mach-tegra/fuse.c
drivers/rtc/rtc-sa1100.c
Pull "ARM: global cleanups" from Arnd Bergmann:
"Quite a bit of code gets removed, and some stuff moved around, mostly
the old samsung s3c24xx stuff. There should be no functional changes
in this series otherwise. Some cleanups have dependencies on other
arm-soc branches and will be sent in the second round.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>"
Fixed up trivial conflicts mainly due to #include's being changes on
both sides.
* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (121 commits)
ep93xx: Remove unnecessary includes of ep93xx-regs.h
ep93xx: Move EP93XX_SYSCON defines to SoC private header
ep93xx: Move crunch code to mach-ep93xx directory
ep93xx: Make syscon access functions private to SoC
ep93xx: Configure GPIO ports in core code
ep93xx: Move peripheral defines to local SoC header
ep93xx: Convert the watchdog driver into a platform device.
ep93xx: Use ioremap for backlight driver
ep93xx: Move GPIO defines to gpio-ep93xx.h
ep93xx: Don't use system controller defines in audio drivers
ep93xx: Move PHYS_BASE defines to local SoC header file
ARM: EXYNOS: Add clock register addresses for EXYNOS4X12 bus devfreq driver
ARM: EXYNOS: add clock registers for exynos4x12-cpufreq
PM / devfreq: update the name of EXYNOS clock registers that were omitted
PM / devfreq: update the name of EXYNOS clock register
ARM: EXYNOS: change the prefix S5P_ to EXYNOS4_ for clock
ARM: EXYNOS: use static declaration on regarding clock
ARM: EXYNOS: replace clock.c for other new EXYNOS SoCs
ARM: OMAP2+: Fix build error after merge
ARM: S3C24XX: remove call to s3c24xx_setup_clocks
...
Josh Cartwright
Kevin F. Haggerty
Francescodario Cuzzocrea
Mao Jinlong
Xiaocheng Li
Linux Build Service Account
Mohit Aggarwal
Figo Wang
Prasad Sodagudi
Ashay Jaiswal
Stephen Boyd
Duy Truong
Steve Muckle
Rajkumar Kasirajan
Linus Torvalds
John Stultz
Anatolij Gustschin
Linus Walleij
Konstantin Shlyakhovoy
Tushar Behera
Jan Beulich
Andreas Dumberger
Jett.Zhou
Rohit Vaswani
Rob Herring