hrtimer_enqueue_reprogram contains a race which could result in
timer.base switch during unlock/lock sequence.
hrtimer_enqueue_reprogram is releasing the lock protecting the timer
base for calling raise_softirq_irqsoff() due to a lock ordering issue
versus rq->lock.
If during that time another CPU calls __hrtimer_start_range_ns() on
the same hrtimer, the timer base might switch, before the current CPU
can lock base->lock again and therefor the unlock_timer_base() call
will unlock the wrong lock.
[ tglx: Added comment and massaged changelog ]
Change-Id: I327d862c28f24b77a62861764393c4bf660a7318
Signed-off-by: Leonid Shatz <leonid.shatz@ravellosystems.com>
Signed-off-by: Izik Eidus <izik.eidus@ravellosystems.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1359981217-389-1-git-send-email-izik.eidus@ravellosystems.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Git-commit: b22affe0aef429d657bc6505aacb1c569340ddd2
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Signed-off-by: Taniya Das <tdas@codeaurora.org>
The condition check in autosleep_store() is incorrect and prevents
/sys/power/autosleep from working as advertised. Fix that.
[rjw: Added the changelog.]
Change-Id: I231cc24fc3f245003dcf5053ff6a71eb69ffa273
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Git-commit: 040e5bf65e1ee66266bc314c5965518a7c21ff36
Git-repo: git://codeaurora.org/kernel/msm.git
Signed-off-by: Anurag Singh <anursing@codeaurora.org>
The current code makes the assumption that a cpu_base lock cannot
be held if a CPU is offline, which is tragically wrong.
If a hrtimer is not queued, then it will not be migrated by
migrate_hrtimers() when a CPU is offlined. Therefore, the
hrtimer's cpu_base may still point to a CPU which has
subsequently gone offline if the timer wasn't enqueued at the
time the CPU went down.
Normally this wouldn't be a problem, but a cpu_base's lock is
blindly reinitialized each time a CPU is brought up. If a CPU is
brought online during the period that another thread is
performing a hrtimer operation on a stale hrtimer, then the lock
will be reinitialized under its feet, and a SPIN_BUG() like the
following will be observed:
[ 448.212369] BUG: spinlock already unlocked on CPU#3,
swapper/3/0
[ 448.217368] lock: 0xc47b1a40, .magic: dead4ead, .owner:
swapper/3/0, .owner_cpu: -1
[ 448.217398] [<c0014398>] (unwind_backtrace+0x0/0x120) from
[<c0269ab0>] (do_raw_spin_unlock+0x44/0xdc)
[ 448.217419] [<c0269ab0>] (do_raw_spin_unlock+0x44/0xdc) from
[<c071bbb0>] (_raw_spin_unlock_irqrestore+0xc/0x38)
[ 448.217438] [<c071bbb0>]
(_raw_spin_unlock_irqrestore+0xc/0x38) from [<c00aa498>]
(hrtimer_try_to_cancel+0xf8/0x10c)
[ 448.217455] [<c00aa498>] (hrtimer_try_to_cancel+0xf8/0x10c)
from [<c00aa4bc>] (hrtimer_cancel+0x10/0x20)
[ 448.217475] [<c00aa4bc>] (hrtimer_cancel+0x10/0x20) from
[<c00e6934>] (rcu_idle_exit_common+0x5c/0xe0)
[ 448.217494] [<c00e6934>] (rcu_idle_exit_common+0x5c/0xe0) from
[<c00e6ae8>] (rcu_idle_exit+0x9c/0xb4)
[ 448.217514] [<c00e6ae8>] (rcu_idle_exit+0x9c/0xb4) from
[<c000f2dc>] (cpu_idle+0x98/0xf0)
[ 448.217529] [<c000f2dc>] (cpu_idle+0x98/0xf0) from
[<000081ac>] (0x81ac)
CRs-Fixed: 460670
Change-Id: I588f6a864054abe6d4c249aad815c6d2f5a54077
Signed-off-by: Michael Bohan <mbohan@codeaurora.org>
Drop whitespace, unused Kconfigs, and bad Makefile entries. Undo
code movement, remove dead function, and delete entire files that
we don't compile that make our code divergent from upstream. No
functional difference.
Change-Id: I1150b3d4b317fb5180c5d26e2366dccb28a6bf43
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add conditional compilation for touch event sysfs nodes. Otherwise,
if CONFIG_PM_SLEEP is not defined, there could be compilation errors.
Change-Id: I1ac7f284ec35eae2cfa076ef8e71c29ddc24817c
Signed-off-by: Amar Singhal <asinghal@codeaurora.org>
Signed-off-by: Anurag Singh <anursing@codeaurora.org>
Make it possible to configure out the user space wakeup sources
garbage collector for debugging and default Android builds.
Change-Id: I85ca6caa92c8e82d863f0fa58d8861b5571c1b4a
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Arve Hjønnevåg <arve@android.com>
Git-commit: 4e585d25e120f1eae0a3a8bf8f6ebc7692afec18
Git-repo: git://codeaurora.org/kernel/msm.git
Signed-off-by: Anurag Singh <anursing@codeaurora.org>
Make it possible to configure out the check against the limit of
user space wakeup sources for debugging and default Android builds.
Change-Id: I8f74d7c8391627df970d2df666938069b012e2fe
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Arve Hjønnevåg <arve@android.com>
Git-commit: c73893e2ca731b4a81ae59246ab57979aa188777
Git-repo: git://codeaurora.org/kernel/msm.git
Signed-off-by: Anurag Singh <anursing@codeaurora.org>
The config options HAS_WAKELOCK and WAKELOCK are
not needed any more since a wakeup sources-based
wakelock implementation will be used.
Change-Id: I4163f048c079ec3d10a02d9db16c3ca6fb5fd759
Signed-off-by: Anurag Singh <anursing@codeaurora.org>
Android allows user space to manipulate wakelocks using two
sysfs file located in /sys/power/, wake_lock and wake_unlock.
Writing a wakelock name and optionally a timeout to the wake_lock
file causes the wakelock whose name was written to be acquired (it
is created before is necessary), optionally with the given timeout.
Writing the name of a wakelock to wake_unlock causes that wakelock
to be released.
Implement an analogous interface for user space using wakeup sources.
Add the /sys/power/wake_lock and /sys/power/wake_unlock files
allowing user space to create, activate and deactivate wakeup
sources, such that writing a name and optionally a timeout to
wake_lock causes the wakeup source of that name to be activated,
optionally with the given timeout. If that wakeup source doesn't
exist, it will be created and then activated. Writing a name to
wake_unlock causes the wakeup source of that name, if there is one,
to be deactivated. Wakeup sources created with the help of
wake_lock that haven't been used for more than 5 minutes are garbage
collected and destroyed. Moreover, there can be only WL_NUMBER_LIMIT
wakeup sources created with the help of wake_lock present at a time.
The data type used to track wakeup sources created by user space is
called "struct wakelock" to indicate the origins of this feature.
This version of the patch includes an rbtree manipulation fix from John Stultz.
Change-Id: Icb452cfd54362b49dcb1cff88345928a2528ad97
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Git-commit: b86ff9820fd5df69295273b9aa68e58786ffc23f
Git-repo: git://codeaurora.org/kernel/msm.git
[anursing@codeaurora.org: replace existing implementation, resolve
merge conflicts]
Signed-off-by: Anurag Singh <anursing@codeaurora.org>
Android uses one wakelock statistics that is only necessary for
opportunistic sleep. Namely, the prevent_suspend_time field
accumulates the total time the given wakelock has been locked
while "automatic suspend" was enabled. Add an analogous field,
prevent_sleep_time, to wakeup sources and make it behave in a similar
way.
Change-Id: I4b9719d05da020757d7cc21ed3b52b7c32261bea
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Git-commit: 55850945e872531644f31fefd217d61dd15dcab8
Git-repo: git://codeaurora.org/kernel/msm.git
Signed-off-by: Anurag Singh <anursing@codeaurora.org>
Introduce a mechanism by which the kernel can trigger global
transitions to a sleep state chosen by user space if there are no
active wakeup sources.
It consists of a new sysfs attribute, /sys/power/autosleep, that
can be written one of the strings returned by reads from
/sys/power/state, an ordered workqueue and a work item carrying out
the "suspend" operations. If a string representing the system's
sleep state is written to /sys/power/autosleep, the work item
triggering transitions to that state is queued up and it requeues
itself after every execution until user space writes "off" to
/sys/power/autosleep.
That work item enables the detection of wakeup events using the
functions already defined in drivers/base/power/wakeup.c (with one
small modification) and calls either pm_suspend(), or hibernate() to
put the system into a sleep state. If a wakeup event is reported
while the transition is in progress, it will abort the transition and
the "system suspend" work item will be queued up again.
Change-Id: Ic3214de009c64feab606e93811bd442ccfc49d86
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Git-commit: 7483b4a4d9abf9dcf1ffe6e805ead2847ec3264e
Git-repo: git://codeaurora.org/kernel/msm.git
[anursing@codeaurora.org: replace existing implementation, resolve
merge conflicts]
Signed-off-by: Anurag Singh <anursing@codeaurora.org>
Remove parts of code that use the legacy wakelock
implementation as we make the switch to the upstream
kernel's wakeup sources-based implementation.
Change-Id: Idab9e3dd54e8a256b059c88606c9368f7ddb1c1b
Signed-off-by: Anurag Singh <anursing@codeaurora.org>
This reverts commit 8c880ff58f.
Reverting the change is required to allow for cleaner conflict
resolution as we move to the upstream kernel's wakeup sources
based wakelock implementation.
Change-Id: Ie14fe26a0fa244815dde7845330351beeef66f99
Signed-off-by: Anurag Singh <anursing@codeaurora.org>
A killed task can stay in the task list long after its
memory has been returned to the system, therefore
ignore any tasks whose mm struct has been freed.
Change-Id: I76394b203b4ab2312437c839976f0ecb7b6dde4e
CRs-fixed: 450383
Signed-off-by: Liam Mark <lmark@codeaurora.org>
Add synaptics driver support and firmware update support
for synaptics touch panel, this patch also adds support
for virtual keys. Corrects issues in "first commit" and
"v1.1" of open source code.
Change-Id: I78dcc2f540ca78e192b4570e414a8802e8982945
Signed-off-by: Amy Maloche <amaloche@codeaurora.org>
- Add fwu_go_nogo function in synaptics_fw_update.c
- Add BTN_TOUCH support in synaptics_i2c_rmi4.c
- Add List check in synaptics_i2c_rmi4.c
Change-Id: I8cb776d5b3d20bdee5036cfe0dbcb9bbaa8bf6bd
[amaloche@codeaurora.org: Subject modified from "v1.1"
- Removed reg_access & fw_updater files due to improper license
- Modified commit text to reflect file changes]
Signed-off-by: Amy Maloche <amaloche@codeaurora.org>
Improper licensing on files, should not be in build.
Change-Id: Ic6e1e606a4012afdb191ea13a38d56d6ed2cc701
Signed-off-by: Amy Maloche <amaloche@codeaurora.org>
Calling coresight_abort() on kernel panic will stop/disable the
current sink and dump other necessary info to aid post crash
analysis.
Change-Id: I9d1b0ab2ba9d1a665727ea436df0c906fc80dab7
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Added new procfs flag to toggle the automatic addition of prefix
routes on a per device basis. The new flag is accept_ra_prefix_route.
Defaults to 1 as to not break existing behavior.
Change-Id: If25493890c7531c27f5b2c4855afebbbbf5d072a
CRs-Fixed: 435320
Acked-by: Harout S. Hedeshian <harouth@qti.qualcomm.com>
Signed-off-by: Tianyi Gou <tgou@codeaurora.org>
Enabling SCHED_HRTICK currently results in rq->lock recursion and a hard
hang at bootup. Essentially try_to_wakeup() grabs rq->lock and tries
arming a hrtimer via hrtimer_restart(), which deep down tries waking up
ksoftirqd, which leads to a recursive call to try_to_wakeup() and thus
attempt to take rq->lock recursively!!
This is fixed by having scheduler queue hrtimer via
__hrtimer_start_range_ns() which avoids waking up ksoftirqd.
Signed-off-by: Srivatsa Vaddagiri <vatsa@codeaurora.org>
Change-Id: I11a13be1d9db3a749614ccf3d4f5fb7bf6f18fa1
The PF_WAKE_UP_IDLE per-task flag made it impossible to enable
the old behavior of SD_SHARE_PKG_RESOURCES, where every task
migrates to an idle CPU on wakeup.
The sched_wake_to_idle sysctl value, when made nonzero, will cause
all tasks to migrate to an idle CPU if one is available when the
task is woken up. This is regardless of how PF_WAKE_UP_IDLE is
configured for tasks in the system. Similar to PF_WAKE_UP_IDLE,
the SD_SHARE_PKG_RESOURCES scheduler domain flag must be enabled
for the sysctl value to have an effect.
Change-Id: I23bed846d26502c7aed600bfcf1c13053a7e5f61
Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
The trace_printk, when configured to process printk strings before
storing them in the internal ring buffer, currently also logs the
complete internal buffer data structure to the STM. Instead it
should only log the string output obtained after processing the
printk format and arguments. Changing the stm_log call to only
log this relevant data.
Change-Id: Ia33109f95fb84fa1606247a861deeaedd2f95d3f
Signed-off-by: Pushkar Joshi <pushkarj@codeaurora.org>
The stm_log call in tracing_mark_write was logging the complete
internal buffer data structure instead of only the data part.
Changing the call to only log the data.
Change-Id: I33e800cd9b1dc1d27d519c74db0cf5bb6ef6e3f5
Signed-off-by: Pushkar Joshi <pushkarj@codeaurora.org>
The flushing of the console in the CPU_ONLINE callback on a hotplug
is rather slow, taking up to 11 ms to complete. Defer this to lower
hotplug latency.
Change-Id: If96089fe2c6cd6024d1a9e2bac35296aea75cf9e
Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org>
Each grace period is supposed to have at least one callback waiting
for that grace period to complete. However, if CONFIG_NO_HZ=n, an
extra callback-free grace period is no big problem -- it will chew up
a tiny bit of CPU time, but it will complete normally. In contrast,
CONFIG_NO_HZ=y kernels have the potential for all the CPUs to go to
sleep indefinitely, in turn indefinitely delaying completion of the
callback-free grace period. Given that nothing is waiting on this grace
period, this is also not a problem.
That is, unless RCU CPU stall warnings are also enabled, as they are
in recent kernels. In this case, if a CPU wakes up after at least one
minute of inactivity, an RCU CPU stall warning will result. The reason
that no one noticed until quite recently is that most systems have enough
OS noise that they will never remain absolutely idle for a full minute.
But there are some embedded systems with cut-down userspace configurations
that consistently get into this situation.
All this begs the question of exactly how a callback-free grace period
gets started in the first place. This can happen due to the fact that
CPUs do not necessarily agree on which grace period is in progress.
If a CPU still believes that the grace period that just completed is
still ongoing, it will believe that it has callbacks that need to wait for
another grace period, never mind the fact that the grace period that they
were waiting for just completed. This CPU can therefore erroneously
decide to start a new grace period. Note that this can happen in
TREE_RCU and TREE_PREEMPT_RCU even on a single-CPU system: Deadlock
considerations mean that the CPU that detected the end of the grace
period is not necessarily officially informed of this fact for some time.
Once this CPU notices that the earlier grace period completed, it will
invoke its callbacks. It then won't have any callbacks left. If no
other CPU has any callbacks, we now have a callback-free grace period.
This commit therefore makes CPUs check more carefully before starting a
new grace period. This new check relies on an array of tail pointers
into each CPU's list of callbacks. If the CPU is up to date on which
grace periods have completed, it checks to see if any callbacks follow
the RCU_DONE_TAIL segment, otherwise it checks to see if any callbacks
follow the RCU_WAIT_TAIL segment. The reason that this works is that
the RCU_WAIT_TAIL segment will be promoted to the RCU_DONE_TAIL segment
as soon as the CPU is officially notified that the old grace period
has ended.
This change is to cpu_needs_another_gp(), which is called in a number
of places. The only one that really matters is in rcu_start_gp(), where
the root rcu_node structure's ->lock is held, which prevents any
other CPU from starting or completing a grace period, so that the
comparison that determines whether the CPU is missing the completion
of a grace period is stable.
Change-Id: Ic77e2bbe865059aa6f363db284473e9adcf8797e
Reported-by: Becky Bruce <bgillbruce@gmail.com>
Reported-by: Subodh Nijsure <snijsure@grid-net.com>
Reported-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Paul Walmsley <paul@pwsan.com> # OMAP3730, OMAP4430
Cc: stable@vger.kernel.org
Signed-off-by: Jin Hong <jinh@codeaurora.org>
Add code to calculate the run queue depth of a cpu and iowait
depth of the cpu.
The scheduler calls in to sched_update_nr_prod whenever there
is a runqueue change. This function maintains the runqueue average
and the iowait of that cpu in that time interval.
Whoever wants to know the runqueue average is expected to call
sched_get_nr_running_avg periodically to get the accumulated
runqueue and iowait averages for all the cpus.
Change-Id: Id8cb2ecf0ed479f090a83ccb72dd59c53fa73e0c
Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org>
It is sometimes useful to profile how long CPU frequency switches
take, and traces have already been added for this purpose. Make
use of these and the trace_stat framework to generate statistical
histograms of frequency switch times in the following format:
# cat /sys/kernel/debug/tracing/trace_stat/cpu_freq_switch
CPU START_KHZ END_KHZ COUNT AVG_US MIN_US MAX_US
| | | | | | |
0 384000 1512000 3 2787 1648 3418
0 486000 384000 1 1129 1129 1129
0 1458000 384000 1 3174 3174 3174
0 1512000 384000 1 3265 3265 3265
0 1512000 486000 1 3235 3235 3235
0 1512000 1458000 1 213 213 213
0 1512000 1512000 1 0 0 0
Profiling is disabled by default (since it does incur some
overhead). It can be enabled or re-disabled echoing 1 or 0
to /sys/kernel/debug/tracing/cpu_freq_switch_profile_enabled
Change-Id: I3ef7f9d681b7bd13bcaa031003b10312afe1aefe
Signed-off-by: Matt Wagantall <mattw@codeaurora.org>
Certain workloads may benefit from the SD_SHARE_PKG_RESOURCES behavior
of waking their tasks up on idle CPUs. The feature has too much of a
negative impact on other workloads however to apply globally. The
PF_WAKE_UP_IDLE flag tells the scheduler to wake up tasks that have this
flag set, or tasks woken by tasks with this flag set, on an idle CPU
if one is available.
Change-Id: I20b28faf35029f9395e9d9f5ddd57ce2de795039
Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
Since we can use ftrace event to also log printk to STM, remove
direct logging of printk to STM.
Change-Id: I903e2584b40565513342864827455f0a6cbf2260
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
'ret' in __ftrace_function_set_filter() may be used uninitialized
if 're_count' is zero. Fix this to avoid a compiler warning.
Change-Id: I0a257159141d86d92573c28d233a3653e89c48ea
Signed-off-by: Matt Wagantall <mattw@codeaurora.org>
Dup ftrace event traffic (including writes to trace_marker file from
userspace) to STM. Also dup printk traffic to STM. This allows Linux
tracing and log data to be correlated with other data transported over
STM.
Change-Id: Ieb0b856447f7667eb0005a6a884211dc46f50217
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
The timer_start event now shows whether the timer is
deferrable in case of a low-res timer. The debug_activate
function now includes deferrable flag while calling
trace_timer_start event. irq_handler_entry
event includes the ISR function in the trace event.
Change-Id: Ia2eeb4fa0fae34b301964144dad8bcef7632487c
Signed-off-by: Badhri Jagan Sridharan <badhris@codeaurora.org>
Recalculating the sleep length each time its called allows us to account
for the fact that the amount of time we can sleep for might change after
tick_nohz_stop_sched_tick is called in idle. The prime example of this
is an idle notifier that cancels timers as we are entering idle.
Change-Id: I92871efc7befb3fee2a816da16145ba9da334a9e
Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org>
panic_lock is meant to ensure that panic processing takes
place only on one cpu; if any of the other cpus encounter
a panic, they will spin waiting to be shut down.
However, this causes a regression in this scenario:
1. Cpu 0 encounters a panic and acquires the panic_lock
and proceeds with the panic processing.
2. There is an interrupt on cpu 0 that also encounters
an error condition and invokes panic.
3. This second invocation fails to acquire the panic_lock
and enters the infinite while loop in panic_smp_self_stop.
Thus all panic processing is stopped, and the cpu is stuck
for eternity in the while(1) inside panic_smp_self_stop.
To address this, disable local interrupts with
local_irq_disable before acquiring the panic_lock. This will
prevent interrupt handlers from executing during the panic
processing, thus avoiding this particular problem.
Change-Id: Ibf70e96343d35587571968bbc39062e28b7d3c0a
Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org>
The following merge commit chose the irq_domain implementation
from AU_LINUX_ANDROID_ICS.04.00.04.00.126 instead of the version
in v3.4.
commit f132c6cf77
Merge: 23016de3f6240f
Author: Steve Muckle <smuckle@codeaurora.org>
Date: Wed Jun 6 18:30:57 2012 -0700
Merge commit 'AU_LINUX_ANDROID_ICS.04.00.04.00.126' into
msm-3.4
Since this version is inconsistent with the upstream,
port the irq_domain framework to the version in v3.4 and
makes all necessary changes to clients that are out of spec.
Details of client ports are below.
-Update the qpnp-int driver for revmap irq_domain API. The revmap
irq_domain implementation introduces a reverse lookup scheme using
a radix tree. This scheme is useful for controllers like qpnp-int
that require a large range of hwirqs.
-Bring the ARM GIC driver up to v3.4, being careful
to port existing CAF changes.
-Partially port the gpio-msm-common driver to the new irq_domain API.
Enable the gpio-msm-common driver to work with the new irq_domain
API using a linear revmap. It is not a full port since irq_domain
is still only registered for Device Tree configurations. It should
be registered even for legacy configurations.
In addition, the irq_domains .map function should be setting all
the fields currently done in msm_gpio_probe(). That's not
currently possible since msm_gpio_probe is invoked
unconditionally - even from Device Tree configurations.
Finally, gpio-msm-common should be converted into a real
platform_device so that probe() is invoked due to driver and
device matching.
Change-Id: I19fa50171bd244759fb6076e3cddc70896d8727b
Signed-off-by: Michael Bohan <mbohan@codeaurora.org>
* commit 'AU_LINUX_ANDROID_ICS.04.00.04.00.130': (39 commits)
msm: vidc: Add support for DIVX 4/5/6
msm_fb: display: Set the minimal sleep time for DSI PHY Initialisation
board: 8930: add debounce interval for gpio-keys
regulator: Extend of_get_regulator_init_data to support non-DT consumers
regulator: pm8xxx-regulator: Add slew_rate platform data parameter
crypto: Fix initialization of array variable.
arm: free all .init memory when CONFIG_STRICT_MEMORY_RWX is set
msm: clock-copper: Remove block reset ability from most clocks
msm: clock-local2: Fix local_vote_clk_reset to use right to_*_clk macro
EHCI: HSIC: Add support for suspend, resume and URB logging
arm/dt: msm-pm8941: Change boost regulator register address to 0xA000
msm: camera: Move server code into seperate file.
msm: camera: Close camera gracefully in case of userspace crash
media: dvb: mpq: Support getting decoder's buffer status
Bluetooth: Wait for wcnss to be ready after SSR
msm: msm_sdcc: Add device tree support for SDCC controllers
msm: display: Change DSI escape clock to byte clock
msm: clock-8960: Change source of DSI escape clock to byte clock
ASOC: msm: Enable mpq8064 machine driver.
EHCI: HSIC: Set the interrupt threshold control value to 8ms
...
Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
AU_LINUX_ANDROID_ICS.04.00.04.00.126 from msm-3.0.
First parent is from google/android-3.4.
* commit 'AU_LINUX_ANDROID_ICS.04.00.04.00.126': (8712 commits)
PRNG: Device tree entry for qrng device.
vidc:1080p: Set video core timeout value for Thumbnail mode
msm: sps: improve the debugging support in SPS driver
board-8064 msm: Overlap secure and non secure video firmware heaps.
msm: clock: Add handoff ops for 7x30 and copper XO clocks
msm_fb: display: Wait for external vsync before DTV IOMMU unmap
msm: Fix ciruclar dependency in debug UART settings
msm: gdsc: Add GDSC regulator driver for msm-copper
defconfig: Enable Mobicore Driver.
mobicore: Add mobicore driver.
mobicore: rename variable to lower case.
mobicore: rename folder.
mobicore: add makefiles
mobicore: initial import of kernel driver
ASoC: msm: Add SLIMBUS_2_RX CPU DAI
board-8064-gpio: Update FUNC for EPM SPI CS
msm_fb: display: Remove chicken bit config during video playback
mmc: msm_sdcc: enable the sanitize capability
msm-fb: display: lm2 writeback support on mpq platfroms
msm_fb: display: Disable LVDS phy & pll during panel off
...
Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
Add conditional compilation for touch event sysfs nodes. Otherwise,
if CONFIG_PM_SLEEP is not defined, there could be compilation errors.
Change-Id: I1ac7f284ec35eae2cfa076ef8e71c29ddc24817c
Signed-off-by: Amar Singhal <asinghal@codeaurora.org>
Adding a new ioctl to support sanitize operation in eMMC
cards version 4.5.
The sanitize ioctl support helps performing this operation
via user application.
Change-Id: I79aa4163e7753a75bed5a26a9a92de902b4b9c21
Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
On non-developer devices kgdb prevents CONFIG_PANIC_TIMEOUT from
rebooting the device after a panic. Add module parameters
debug_core.break_on_exception and debug_core.break_on_panic to
allow skipping debug on panics and exceptions respectively. Both
default to true to preserve existing behavior.
Change-Id: I75dce7263e96cee069a9750920cce83dc6f98e8c
Signed-off-by: Colin Cross <ccross@android.com>
task_tick_rt has an optimization to only reschedule SCHED_RR tasks
if they were the only element on their rq. However, with cgroups
a SCHED_RR task could be the only element on its per-cgroup rq but
still be competing with other SCHED_RR tasks in its parent's
cgroup. In this case, the SCHED_RR task in the child cgroup would
never yield at the end of its timeslice. If the child cgroup
rt_runtime_us was the same as the parent cgroup rt_runtime_us,
the task in the parent cgroup would starve completely.
Modify task_tick_rt to check that the task is the only task on its
rq, and that the each of the scheduling entities of its ancestors
is also the only entity on its rq.
Change-Id: I4f5b118517f85db3570923eb2f5e4c933ece9247
Signed-off-by: Colin Cross <ccross@android.com>
Leonid Shatz
Arve Hjønnevåg
Michael Bohan
Stephen Boyd
Amar Singhal
Rafael J. Wysocki
Anurag Singh
Kees Cook
Liam Mark
Shantanu Jain
Alexandra Chin
Amy Maloche
Linux Build Service Account
Pratik Patel
Tianyi Gou
Srivatsa Vaddagiri
Steve Muckle
Pushkar Joshi
Jeff Ohlstein
Paul E. McKenney
Matt Wagantall
Badhri Jagan Sridharan
Vikram Mulukutla
Todd Poynor
Colin Cross
Maya Erez